Highway 1 (New South Wales)

This article is about the section of Highway 1 in New South Wales. For the entire length of the highway, see Highway 1 (Australia).
Highway 1
New South Wales
Map of New South Wales with Highway 1 highlighted in red
General information
Type Highway
Length 2,964 km (1,842 mi)
Opened 1955
Route number(s)
Major junctions
North end NSW/QLD/ border near Tweed Heads, New South Wales
 
South end NSW/VIC border near Timbillica, New South Wales
Location(s)
Major settlements Ballina, Coffs Harbour, Port Macquarie, Taree, Newcastle, Sydney, Wollongong, Batemans Bay, Bega
Highway system
Highways in Australia
National Highway • Freeways in Australia
Highways in New South Wales
  • Infobox instructions
  • guidelines
  • examples
  • talk

In New South Wales, Highway 1 is a 1,351-kilometre (839 mi) long[1] route that crosses the state, from the Queensland/New South Wales border near Tweed Heads to the Victorian border near Timbillica. It provides the main coastal route between Brisbane and Melbourne via Sydney. Highway 1 continues around the rest of Australia, joining all mainland state capitals, and connecting major centres in Tasmania.

Route 1 sign for Princes Highway at Moruya

With the entire route passing close to the coast, for many New South Wales residents Highway 1 is synonymous with summer holiday road trips. Parts of the route are also busy intercity or commuter routes.

While the route is defined by its designation of "1", with today's alphanumeric route numbering system the route consists of eight sections, alternating between the M1 designation (for motorway grade sections) and the A1 designation (for other sections).

History

Highway 1 was created as part of the National Route Numbering system, adopted in 1955. The route was compiled from an existing network of state and local roads and tracks.[2]

Route Numbering

When Highway 1 was declared in 1955, the entire route carried the National Route 1 shield. In 1974, the Sydney-Newcastle Freeway section was declared part of the National Highway, and the route marker was subsequently updated to National Highway 1 for this section [3]

In 1993, the route numbering was further complicated with the introduction of the Metroad numbering system within the Sydney metro area. The section of highway 1 between Wahroonga and Waterfall was proclaimed Metroad 1.

In 2013, alphanumeric route numbering was introduced to New South Wales, and all sections of Highway 1 were changed to carry either the M1 or A1 designation, depending on the grade of the road. As of 2013, large sections of the Pacific Highway are actually of motorway standard, despite still carrying the A1 designation. The government has explained this is to avoid frequent changes in route designation, with plans to update the designation to M1 over time as large sections of road are brought to motorway standard.[4]

Route description

Route map: Bing / Google

KML is from Wikidata

Highway 1 travels multiple named roads on its journey from the Queensland to the Victorian border:

Major intersections

Highway 1 intersects the following major roads in New South Wales:[1]

References

  1. 1 2 3 Google (21 March 2013). "Highway 1 (New South Wales)" (Map). Google Maps. Google. Retrieved 21 March 2013.
  2. ↑ Taylor, David (2012). The Highway One travel companion. Volume 1, Melbourne to Tweed Heads. Salisbury, Queensland: Boolarong Press. p. 9. ISBN 9780987218902.
  3. ↑ http://www.ozroads.com.au/NationalSystem/hwy1-nsw.htm OzRoads: HIGHWAY ONE New South Wales Section
  4. ↑ http://engage.haveyoursay.nsw.gov.au/road-route-markers?module=qanda&qn_id=4413#single_question_4413

See also

This article is issued from Wikipedia - version of the 4/4/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.