Aerotrain (KLIA)

For other uses, see Aerotrain (disambiguation).
Aerotrain
Overview
Type People mover
Status Operational
Locale Kuala Lumpur International Airport, Malaysia
Stations 2
Services 1
Operation
Opened 1998
Owner Malaysia Airports Holdings Berhad
Operator(s) Engineering Transportation, Malaysia Airport (Sepang) Sdn. Bhd.
Character Serves sterile parts of the airport
Rolling stock 3-car 2 trainsets of Bombardier Innovia APM 100
Technical
Track length 1.2 km
Operating speed Maximum speed 56.3 km/h (35 mph), Minimum speed 46.7 km/h (29 mph)
Highest elevation Partially underground
Route map

Legend
 Terminal A
Main Terminal Mainline rail interchange  6  7 
Operations, Maintenance
and Storage Facility

The Aerotrain is an automated people mover (APM) system located within the Kuala Lumpur International Airport in Malaysia.

Opened in 1998 along with the airport, the Aerotrain system consists of two stations, one in the Main Terminal Building and the other in Satellite Building A. The system is the only means of transport for passengers between the two terminals.

Upgrading works on the Aerotrain had caused the service to be suspended between November 1, 2010 and March 15, 2011. Passengers were transferred between the Main Terminal Building and the Satellite Building by bus shuttles during the upgrading period.[1]

General information

The Aerotrain is fully automated and driverless. Usually, two trains ply between the two stations. In accordance with the Spanish solution, when the train reaches the platform, the exit doors will open first for passengers to disembark, after which the entrance door on the other side will open.

Part of the train track goes underground to cross the taxiway. The ride between the Main Terminal Building and Satellite Terminal A takes about 2.5 minutes.

The Aerotrain supported various operating modes such as Synchronized Double Shuttle Mode, Offset synchronized Double Shuttle Mode, Unsynchronized Double Shuttle Mode, Single Shuttle Mode, On-Call Mode, Test Train Mode and lastly Out Of Service Mode. The Aerotrain has 4 major sub-systems which is the Central Control System, Vehicle System, Station Automatic Train Operation (ATO) System and Power Distribution System (PDS). The trains have an operating speed of 56 km/h with a 3-phase 600V power supply at 50 Hz. A 100 hp DC Electric Motor constitutes the propulsion system of the trains.

The maintenance of the Aerotrain is scheduled at 1000hrs till 1200hrs and 0000hrs till 0500hrs everyday. During those periods, only one of the trains will be running for operation and the other one will undergo maintenance works and safety checks. The frequency of the train decreases from every 2.5 minutes to every 5 minutes during the maintenance periods.

Rolling stock

The rolling stock is manufactured by Adtranz (acquired by Bombardier Transportation). It comprises three Innovia APM 100 trains with three cars per train (originally two cars), of which each car has a capacity of 249.[2]

On March 15, 2011, a new train has been added to the fleet which is known as Train 3. The addition is made to cover the shortfall of the Aerotrain system when either Train 1 or Train 2 is scheduled for an overhaul programme. The overhaul programme is necessary as both Train 1 and Train 2 has been in use for 13 years.

Gallery

See also

References

  1. ↑ Temporary Closure of Aerotrain Service at KLIA to allow upgrading of Facility
  2. ↑ KLIA Aerotrain Upgrade Archived September 27, 2007, at the Wayback Machine.

External links

This article is issued from Wikipedia - version of the 11/20/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.