CHKDSK

chkdsk
A component of Microsoft Windows

Chkdsk.exe in action on drive C: in Windows 10
Details
Type Utility software
Included with DOS, OS/2 and Windows
Related components
Microsoft ScanDisk (Co-existed with Chkdsk in Windows 9x and MS-DOS 6.x)

CHKDSK (short for "check disk") is a system tool in DOS, OS/2 and Windows. It verifies the file system integrity of a volume and fixes logical file system errors. It is similar to the fsck command in Unix.

On Windows NT operating systems, CHKDSK can also check the disk surface for bad sectors and mark them. (In MS-DOS 6.x and Windows 9x, this is a task done by Microsoft ScanDisk.) Windows Server version of CHKDSK is RAID-aware and can fully recover data in bad sectors of a disk in a RAID-1 or RAID-5 array if other disks in the set are intact.[1]

CHKDSK can be run from DOS prompt, Windows Explorer, Windows Command Prompt or Recovery Console.[2]

Overview

On Windows NT family, a standard CHKDSK scan consists of three phases of testing file metadata. It looks for errors but does not fix them unless it is explicitly ordered to do so. Same applies to surface scan: This test, which could be extremely time-consuming on large or low-performance disks, is not carried out unless explicitly requested. CHKDSK requires exclusive write access to the volume to perform repairs.[3][4]

Because of the exclusive access requirement and the time-consuming nature of CHKDSK operation, Windows Vista implemented a new file system health model in which the operating system fixes errors on the volumes as it encounters them. In the event that the problem is grave and a full scan is required, Action Center notifies the user to take the volume offline at the first convenience.[5]

Windows Vista and Windows Server 2008 added self-healing ability, turned on by default, in addition to providing the CHKDSK command. It detects physical file system errors and silently fixes them on the fly. Thus, many problems previously discovered on running CHKDSK never appear. It is administered by fsutil repair command.[6][7]

Weaknesses

The MS-DOS 5 Bug

CHKDSK and UNDELETE in MS-DOS 5.0 have a bug which can corrupt data: If the file allocation table of a disk uses 256 sectors, running CHKDSK /F can cause data loss and running UNDELETE can cause unpredictable results. This normally affects disks with a capacity of approximately a multiple of 128 MB. This applies to CHKDSK.EXE and UNDELETE.EXE bearing April 9, 1991 datestamp. This bug was fixed in MS-DOS 5.0a.[8]

The alleged Windows 7 Bug

Before the release of Windows 7, InfoWorld reported an alleged memory leak in CHKDSK; according to the report, the chkdsk /r command would cause the memory consumption to reach the maximum and the system to crash. Randall C. Kennedy of InfoWorld attributed the original report to "various Web sources" and said that in his tests, the memory consumption reached above 90%, although he did not experience a crash. Nevertheless, Kennedy took the memory consumption for a critical bug that would derail Windows 7's launch and cynically chastised Microsoft.[9] Tom Warren of Neowin dismissed Kennedy's assessment of the alleged leak's significance.[10] Steven Sinofsky of Microsoft also responded that Microsoft could not reproduce a crash either but that the massive memory consumption was by design, to improve performance, and not a leak. Ed Bott of ZDNet also reviewed the claim with his own tests and observed that no crash would occur. Noting that chkdsk /r, by design, does not work on the system drive while Windows is online, Bott concluded "it’s arguably a feature, not a bug, and the likelihood that you’ll ever crash a system this way is very, very small and completely avoidable."[11]

See also

References

  1. ↑ Holm, Dan; Thomas, Orin (2003). "11-3: Maintaining Disk Storage Volumes". Managing and Maintaining a Microsoft Windows Server 2003 Environment. Microsoft Press. p. 11.25. ISBN 9780735614376.
  2. ↑ "Description of the Windows XP Recovery Console for advanced users". Support (8.0 ed.). Microsoft. 11 July 2013. Retrieved 4 September 2014.
  3. ↑ "An explanation of the new /C and /I Switches that are available to use with Chkdsk.exe". Support (4.4 ed.). Microsoft. 1 December 2004. Retrieved 4 September 2014.
  4. ↑ "Troubleshooting Disks and File Systems". Windows XP Professional Resource Kit. Microsoft. 3 November 2005. Retrieved 4 September 2014.
  5. ↑ Bangalore, Kiran (10 May 2012). Sinofsky, Steven, ed. "Redesigning chkdsk and the new NTFS health model". Building Windows 8. Microsoft.
  6. ↑ Chen, Ken (4 August 2014). "NTFS Self-Healing is An Overlooked but Useful Feature in Windows 7". Next of Windows.
  7. ↑ Pawar, Amit (13 February 2008). "Self-healing NTFS in Windows Server 2008 and Windows Vista". Amit Pawar - Infrastructure blog. Microsoft.
  8. ↑ "When Not to Use MS-DOS 5.0 CHKDSK and UNDELETE Commands". Support (1.1 ed.). Microsoft. 16 November 2006.
  9. ↑ Kennedy, Randall C. (5 August 2009). "Critical Windows 7 bug risks derailing product launch". Infoworld. IDG. Retrieved 19 February 2015.
  10. ↑ Warren, Tom (5 August 2009). "Windows 7 RTM contains a rather nasty chkdsk bug". Neowin. Retrieved 19 February 2015.
  11. ↑ Bott, Ed (5 August 2009). "A killer Windows 7 bug? Sorry, no". ZDNet. CBS Interactive.
Wikimedia Commons has media related to Screenshots of CHKDSK.
This article is issued from Wikipedia - version of the 8/30/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.