Chroma dots
Chroma dots are visual artefacts caused by displaying an unfiltered analogue colour video signal on a black-and-white television or monitor. They are commonly found on black-and-white recordings of television programmes originally made in colour. Chroma dots were once regarded as undesirable picture noise, but recent advances in computer technology have allowed them to be used to reconstruct the original colour signal from black-and-white recordings, providing a means to re-colour material where the original colour copy is lost.
Background
Analogue colour video signals comprise two components: chrominance and luminance. The luminance component describes the brightness of each part of the picture, whilst the chrominance component describes the colour tone. When displayed on a black-and-white monitor, the luminance signal produces a normal black-and-white image, whilst the chrominance signal manifests as a fine pattern of dots of varying size and intensity overlaid over the black-and-white picture. A related phenomenon is dot crawl, which can produce visual artefacts in colour pictures.
History
In the early days of colour television, it was common practice for broadcasters to produce black-and-white film copies of colour programmes for sale and transmission in territories lacking colour broadcast facilities or employing different colour television systems. During the telerecording process, it was normal practice to insert a filter circuit between the colour video output and the black-and-white monitor input in order to remove the colour signal and prevent the formation of chroma dots. In many cases, however, the filter was not used and the chroma dot patterning is permanently burned into the resulting film recording.
Use in restoration
In 1994, James Insell, a BBC engineer, noticed that when playing back a copy of a black-and-white telerecording through colour video equipment, spurious colour was generated by the presence of chroma dots in the picture. He theorised that it might be possible to use the chroma dots to reconstruct the original colour signal,[1] and in 2007 set up a working group[2] to carry out further research.
In 2008, it was announced[3] that members of the working group had successfully managed to restore the Dad's Army episode "Room at the Bottom" using information from the chroma dot patterning. The process has since been used to restore other programmes including the pilot episode[4] of Are You Being Served? and various episodes of Doctor Who. (Planet of the Daleks, episode 3; Invasion of the Dinosaurs, episode 1; and episodes 2-6 of The Mind of Evil) The working group hope that the technique may enable the restoration of many other programmes for which no colour copy is known to exist, however the results are dependent on whether chroma dot patterning is present and the quality of the black-and-white recording.
References
- ↑ "Recapturing colour from black and white film". the Guardian. Retrieved 29 March 2015.
- ↑ "Colour Recovery Working Group". wikispaces.com. Retrieved 29 March 2015.
- ↑ "BBC - Press Office - Dad's Army episode to be seen in colour". bbc.co.uk. Retrieved 29 March 2015.
- ↑ "BBC Two - Are You Being Served?, Pilot". BBC. Retrieved 29 March 2015.