Cobaltocene

Cobaltocene
Names
IUPAC names
Cobaltocene
Bis(η5-cyclopentadienyl)cobalt
Other names
Cp2Co
Identifiers
1277-43-6 YesY
3D model (Jmol) Interactive image
ChEBI CHEBI:30678 N
ChemSpider 83848 YesY
ECHA InfoCard 100.013.692
PubChem 22045960
RTECS number GG0350000
Properties
[Co(η5-C5H5)2]
Molar mass 189.12 g/mol
Appearance Dark purple solid
Melting point 171-173
not soluble
Structure
sandwich
zero
Thermochemistry
236 J K−1 mol−1
+237 kJ/mol (uncertain)
−5839 kJ/mol
Hazards
Xi
R-phrases R10, R36/37/38
S-phrases S9, S16, S26, S33, S37/39
NFPA 704
Flammability code 2: Must be moderately heated or exposed to relatively high ambient temperature before ignition can occur. Flash point between 38 and 93 °C (100 and 200 °F). E.g., diesel fuel Health code 1: Exposure would cause irritation but only minor residual injury. E.g., turpentine Reactivity code 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g., liquid nitrogen Special hazards (white): no codeNFPA 704 four-colored diamond
2
1
0
Related compounds
Related metallocenes
 Ferrocene
Nickelocene
Rhodocene
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YesYN ?)
Infobox references

Cobaltocene, known also as bis(cyclopentadienyl)cobalt(II) or even "bis Cp cobalt", is an organocobalt compound with the formula Co(C5H5)2. It is a dark purple solid that sublimes readily slightly above room temperature. Cobaltocene was discovered shortly after ferrocene, the first metallocene. Due to the ease with which it reacts with oxygen, the compound must be handled and stored using air-free techniques.

Synthesis

Cobaltocene is prepared by the reaction of sodium cyclopentadienide (NaC5H5) with anhydrous cobalt(II) chloride in THF solution. Sodium chloride is cogenerated, and the organometallic product is usually purified by vacuum sublimation.[1]

Structure and bonding

In Co(C5H5)2 the Co centre is "sandwiched" between two cyclopentadienyl (Cp) rings. The Co–C bond lengths are about 2.1 Å, slightly longer than the Fe–C bond in ferrocene.[2]

Co(C5H5)2 belongs to a group of organometallic compounds called metallocenes or sandwich compounds.[3] Cobaltocene has 19 valence electrons, one more than usually found in organotransition metal complexes, such as its very stable relative, ferrocene. (See 18-electron rule.) This additional electron occupies an orbital that is antibonding with respect to the Co–C bonds. Consequently, the Co–C distances are slightly longer than the Fe–C bonds in ferrocene. Many chemical reactions of Co(C5H5)2 are characterized by its tendency to lose this "extra" electron, yielding an 18-electron cation known as cobaltocenium:

2 Co(C5H5)2 + I2 → 2 Co(C
5H
5)+
2		 + 2 I−
19 e−
    
18 e−
  

The otherwise close relative of cobaltocene, rhodocene does not exist as a monomer, but spontaneously dimerizes by formation of a C–C bond between Cp rings.

Reactions

Redox properties

Co(C5H5)2 is a common one-electron reducing agent in the laboratory.[4] In fact, the reversibility of the Co(C5H5)2 redox couple is so well behaved that Co(C5H5)2 may be used in cyclic voltammetry as an internal standard. Its permethylated analogue decamethylcobaltocene (Co(C5Me5)2) is an especially powerful reducing agent, due to inductive donation of electron density from the 10 methyl groups, prompting the cobalt to give up its "extra" electron even more so. These two compounds are rare examples of reductants that dissolve in non-polar organic solvents. The reduction potentials of these compounds follow, using the ferrocene-ferrocenium couple as the reference:

Half-reaction E0 (V)
Fe(C
5H
5)+
2 + e− ⇌ Fe(C5H5)2 		0 (by definition)
Fe(C
5Me
5)+
2 + e− ⇌ Fe(C5Me5)2 		−0.59
Co(C
5H
5)+
2 + e− ⇌ Co(C5H5)2 		−1.33
Co(C
5Me
5)+
2 e− ⇌ Co(C5Me5)2 		−1.94

The data show that the decamethyl compounds are around 600 mV more reducing than the parent metallocenes. This substituent effect is, however, overshadowed by the influence of the metal: changing from Fe to Co renders the reduction more favorable by over 1.3 volts.

Carbonylation

Treatment of Co(C5H5)2 with carbon monoxide gives the cobalt(I) derivative Co(C5H5)(CO)2, concomitant with loss of one Cp ligand.[1]

See also

References

  1. 1 2 King, R. B. (1965). Organometallic Syntheses. 1. New York, NY: Academic Press.
  2. ↑ Antipin, M. Yu.; Boese, R.; Augart, N.; Schmid, G. (1993). "Redetermination of the cobaltocene crystal structure at 100 K and 297 K: Comparison with ferrocene and nickelocene". Struct. Chem. 4 (2): 91–101. doi:10.1007/BF00677370.
  3. ↑ Elschenbroich, C.; Salzer, A. (1992). Organometallics: A Concise Introduction (2nd ed.). Weinheim: Wiley-VCH. ISBN 3-527-28165-7.
  4. ↑ Connelly, N. G.; Geiger, W. E. (1996). "Chemical Redox Agents for Organometallic Chemistry". Chem. Rev. 96 (2): 877–910. doi:10.1021/cr940053x. PMID 11848774.

External links

This article is issued from Wikipedia - version of the 8/27/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.