Kawasaki triple

Kawasaki triples

1969 H1 Mach III 500
Manufacturer Kawasaki
Parent company Kawasaki Heavy Industries
Production 1968–1980
Engine 250 to 750 cc (15 to 46 cu in) air-cooled piston port two-stroke triple

The Kawasaki triples were a range of 250 to 750 cc (15 to 46 cu in) motorcycles made by Kawasaki from 1968 to 1980. The engines were air-cooled, three-cylinder, piston-controlled inlet port two-strokes with two exhaust pipes exiting on the right side of the bike, and one on the left. It was the first production street motorcycle with capacitor discharge ignition (CDI). Right from the first triple model, the 1968 Mach III H1 500 cc, it was a sales success that gained a reputation for almost unmatched acceleration as well as an air of danger for the difficulty in controlling the bike's power with its limited chassis, suspension, and brakes.

Mach III H1 500

Mach III H1 500

1970 Mach III H1 500SS
Production 1968–1976
Engine 498.75 cc (30.436 cu in) air-cooled piston port two-stroke triple
3 Mikuni 28 mm carburetors
Bore / stroke 60.0 mm × 58.8 mm (2.36 in × 2.31 in)
Compression ratio 6.8:1
Top speed 183–201 km/h (114–125 mph)[1][2][3][4][5]
Power 45 kW (60 hp) @ 7,500–8,000 rpm[2][3][4]
Torque 5.6 kg·m (55 N·m; 41 lbf·ft) @ 7,000 rpm[5]
Ignition type CDI (except 1972, points)
Transmission Wet clutch, 5-speed, chain drive
Frame type Steel double cradle
Suspension Front: telescopic fork, Rear: Preload adjustable shock, swingarm
Brakes

Front/rear 180 mm (7.1 in) drum (early models)

Front disc, rear drum (later)
Wheelbase 1,430 mm (56.3 in)
Weight 174 kg (384 lb)[3] (dry)
188 kg (414 lb)[2] (wet)
Fuel consumption 10.2 l/100 km (28 mpg-imp; 23 mpg-US)[2]
Main article: Kawasaki H1 Mach III

The market for motorcycles in 1968 had been changing from time, utilitarian transport to more aggressive sporting motorcycles that disregarded fuel economy and noise, in favor of quicker quarter mile times, which were prominently advertised by manufacturers.[2] While Kawasaki had an inline-four four-stroke in development, it was not going be ready in time to upstage the 1969 Honda CB750, so instead they moved up the release of their conventional piston port two-stroke triple to "make a real splash".[2] They turned to the N100 Plan, a project begun in June, 1967, whose intent was to design the most powerful production motorcycle engine in the world.[6] They first considered increasing the bore of an existing engine but instead created an all-new engine, experimenting with both inline and L cylinder arrangements, with both two and three cylinders.[6] They settled on an inline-three arrangement after testing showed that an inline layout did not adversely affect cooling of the middle cylinder.[6]

The result of this project was the H1 Mach III, with a 15° inclined, inline-triple 498 cc (30.4 cu in) engine, first produced in September, 1968, 14 months after the N100 project began.[2][6] The new model did indeed sell well with young men in the late 1960s, with total production eventually exceeding 110,000 units, though it was unpopular with authorities.[2][6] The bike gave Kawasaki a "rebel" image, "outside the law", which played well with sport bike riders.[3] The racing version, the H1R ridden by Ginger Molloy, took second place in the 1970 Grand Prix World Championship.[3]

The H1 was the first multi-cylinder street motorcycle to use capacitor discharge ignition (CDI) which operated through an automotive style distributor, previously only used in off-road single cylinder motorcycles.[3] The first version of this electronic ignition was overly complex and proved unreliable, so Kawasaki gave up on it briefly, using traditional breaker points, one set for each cylinder, in 1972.[2] For the 1973 H1D, a redesigned CDI was used, which was more reliable with a hotter spark at lower engine speeds, which in turn made it possible to re-jet the three Mikuni carburetors for a wider power band.[2] The US version came with a high handlebar, but a low bar was used in the European market.[5] The H1 was loud, due to the use of racing expansion pipes, brought barely within the limits of noise regulations for the period.[2]

The bike had both detractors and enthusiastic fans, who either complained of poor handling and tendency to wheelie, or praised the power, light weight, and tendency to wheelie.[5] Wheelies could occur unintentionally even during cornering.[2] The two-stroke engine's suddenly increasing power curve, with little response until a rush of power about 5,000 rpm, contributed to this unexpected liftoff of the front wheel, creating "fearsome reputation" from tales of "scary performance."[7] The Mach III became known to its critics as "dangerous for inexperienced riders".[1]

The H1 had a high power-to-weight ratio for the time, 45 kW (60 hp) and a dry weight of 384 pounds (174 kg), comparable to a top racing motorcycle, but had generally poor handling and weak drum brakes front and rear.[3][4] It could accelerate from 0 to 1⁄4 mi (0 to 0 km) in 12.4 seconds.[5] However, Motorcycle Classics said in 2009 that the frequent complaints about the brakes of the H1 by modern writers did not account for the generally poor braking of all motorcycles of the period, noting that in a 1970 Cycle magazine comparison of seven top sport bikes of the time, the H1's braking performance was second only to the Honda CB750.[2]

The notoriously flexible frame was strengthened over the years, along with shifting the center of gravity to decrease the tendency to wheelie.[2] While Kawasaki was working to "make the H1 acceptable in civilized society", they also released the delayed inline-four four-stroke, the Z1, in 1972, which had adequate brakes and handling, comfortable seating, and did not guzzle fuel.[2] The sales success of the Z1 demonstrated that there were more buyers for higher-priced but less obnoxious sport bikes, than buyers who would accept numerous compromises for an extremely fast motorcycle at a low price.[2] More stringent noise and pollution regulations also contributed to the end of the H1 500 production, whose final year was 1976.[2]

The Mach III H1 500 subsequently has been of great interest to collectors and historians of motorcycles, often appearing on lists of most significant motorcycles and, with some irony, "worst bikes" lists.[2] Cycle World semi-seriouly joked that the bike was one of the "10 Worst" for its total compromise of good qualities other than speed, and that the bike "introduced" to America the body cast and liability lawsuit.[8] The H1 was included in the Guggenheim Museum's 1999 The Art of the Motorcycle exhibition in New York, Chicago, Las Vegas, and Bilbao, Spain.[4] Motorcycle historian Clement Salvadori noted in the Guggenheim's catalog that the H1, "was one of the least useful motorcycles available on the market" yet still sold very well because, in the heyday of American muscle cars where quarter mile times were paramount to the young male target buyer, it "could blow just about anything else off the road — for less than $1,000."[4] Roland Brown agreed that it could "beat almost anything away from the lights."[7] Salvadori added that "Motorcycle lore has it that very few original owners of the Mach III survived."[4] While older Baby boomers collected classic brands of the 1950s and 1960s like BSA, Norton and Triumph, a younger generation of motorcycle collectors was nostalgic for H1 Mach IIIs along with other bikes of the era, Honda CBs and CLs, Yamaha RD350s and Suzuki Hustlers.[9]

S1 250 and S2 350

S1 Mach I 250
S2 Mach II 350

In 1971, the S2 350 was introduced, and in 1972 its smaller brother, the S1 250 became available.

H2 Mach IV 750

H2 Mach IV 750
Production 1972–1975
Engine 748 cc (45.6 cu in) air-cooled piston port two-stroke triple
3 Mikuni carburetors
Bore / stroke 71 mm × 63 mm (2.8 in × 2.5 in)
Compression ratio 7.0:1
Top speed 190 km/h (120 mph)[7][10]
Power 55 kW (74 hp) @ 6,800 rpm (claimed)[7][10][11]
Torque 77.4 N·m (57.1 lb·ft) @ 6,600 rpm (claimed)[11]
Ignition type CDI
Transmission Multi-disc, wet clutch, 5-speed, chain drive
Frame type Steel double cradle
Suspension Front: telescopic fork
Rear: twin shocks, swingarm
Brakes Front: disc
Rear drum
Tires Front: 3.25×19"
Rear: 4.0×18"
Wheelbase 1,410 mm (55.5 in)
Dimensions W: 810 mm (32.0 in)
Seat height 830 mm (32.5 in)
Weight

206 kg (454 lb)[7][10]

210.2 kg (463.5 lb)[11] (wet)
Fuel capacity 17 l; 3.7 imp gal (4.5 US gal)
Oil capacity 2.0 l; 3.5 imp pt (4.2 US pt)
Main article: Kawasaki H2 Mach IV

The H2 750 was introduced in 1972, the culmination of Kawasaki's two-stroke project. Kawasaki said of the bike, "It's so quick it demands the razor-sharp reactions of an experienced rider."[10]

Its engine displacement of 748 cc (45.6 cu in) produced 55 kW (74 hp) at 6,800 rpm.[7] The engine was entirely new and not a bored-out 500. With larger displacement as well as less aggressive porting and ignition timing,[10] the H2 750 had a wider power band than the 500 H1, though Roland Brown said it was still "barely more practical" than the smaller predecessor, because Kawasaki had "done little" to address chassis problems, and so the bike was still prone to speed wobble.[7] The 14 bhp (10 kW) gain over the 500 H1 put the H2's output well ahead of its close rivals, the air-cooled four-stroke Honda CB750 and the liquid-cooled two-stroke Suzuki GT750.[10]

To help address the speed wobble issue, the H2 came with a friction-type steering damper, as well as a built-in frame lug to attach a hydraulic steering damper.[7] The H2 had a front disc brake, an all-new capacitor discharge ignition system which performed better than cap and rotor type, was virtually maintenance free, and was unique to the H2. The H2 also had a chain oiler, and a steering friction damper.[12] The front disc brake performed adequately, though some riders added a second front disc for more braking performance.[10]

Even with its limitations, the H2 was a success, because there were not many other bikes that could, Brown said, "even approach" the performance of the H2 Mach IV.[7] A standard, factory produced H2 was able to travel a 1⁄4 mi (0.40 km) from a standing start in as low as 12.0 seconds with an expert rider on board,[12] or 0 to 100 mph (0 to 161 km/h) in under 13 seconds.[7] In 1975 Cycle World tested the H2 Mach IV's quarter mile at 13.06 seconds 99.55 mph (160.21 km/h), with a 0 to 60 mph time of 4.3 seconds, 0 to 100 mph time of 13.2 seconds, and a top speed of 110 mph (180 km/h).[13]

The H-2 was comparison tested by Cycle magazine in 1973 against the Ducati 750, the Honda CB750, the Harley-Davidson Sportster 1000, the Kawasaki Z1, the Triumph Trident 750, and the Norton Commando 750. The competition consisted of acceleration, braking distance, and road race course lap-times. Each test was run several times including 10 attempts at a fastest road course time. The H2 was the fastest accelerating machine, posting the fastest 1/4 mile run on a drag strip. Experts were surprised at the other results. Despite an uncomfortable feel and slight front wheel hop under hard braking and not giving the sensation of stopping particularly fast it had the shortest stopping distance and highest braking G load of all the bikes. On the road course, despite what had been heard and written about its ill handling, frame flexing and the supposed tendency to speed wobble exiting high speed turns, it was tied for the fastest lap time with the Kawasaki Z-1 to the tenth of a second. Overall the Kawasaki H-2 750 had the lowest ET, second-highest quarter-mile speed, the fastest lap time, the strongest braking force, the highest torque and horsepower readings on the dynamometer, the highest power-to-weight ratio, the lowest price and scored by points for performance was by far the least expensive per unit displacement.[14]

Kawasaki's reputation for building what motorcycle writer Alastair Walker called, "scarily fast, good-looking, no holds barred motorcycles" began with the H1.[15] The H2 was part of the rise of the Japanese superbikes, contributing to the decline of Harley Davidson, and nearly extinguished the British motorcycle industry in the US for a long period.[12][16]

S3 400

In 1974, the 350 cc (21 cu in) S2 was expanded to and replaced by a 400 cc (24 cu in) S3. In addition, each model year following was met with toned down performance in attempt to meet new emissions regulations. The H and S series ceased production after 1975, and the model line became the KH series in 1976, omitting the 750 from the lineup and leaving just the KH250, KH400 and KH500. The last year for US sales was 1977, with only the KH400 and the KH250 left in the lineup. Both models continued to be available in Europe and elsewhere until 1980. Stricter emissions regulation and advances in 4-stroke technology caused the demise of the Kawasaki triples in both cases.

The S1 (250cc), and later KH250 (1976-1980) models were popular for some time as a budget performance bike in the UK (Great Britain), because of their small size (although the KH shared the same chassis and gearbox as the KH400), and the fact that at this point in time it was legal for learners ride bikes up to 250cc on a "Provisional Licence" without having to take a test.

This usage stopped in February 1981, however, when learners were restricted to 125cc/12bhp, and virtually overnight the sales of new 250cc machines ceased, not really taking off again until the Big Four started producing high performance 250s in the mid to late 80s in the form of the RG250 (later RGV), TZR, NSR and Kawasaki's class leading (but fragile) KR1 and KR1s.

Timeline

Notes

  1. 1 2 Motorcycle: The Definitive Visual History, DK Publishing, Penguin, 2012, p. 203, ISBN 9781465400888
  2. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Siegal, Margie (July–August 2009). "1974 Kawasaki H1". Motorcycle Classics. Retrieved October 18, 2014.
  3. 1 2 3 4 5 6 7 Ganneau, Didier; Dumas, François-Marie (2001), A Century of Japanese Motorcycles, translated by Kevin Desmond; Gerald G. Guetat, MBI Publishing Company, pp. 94–97, 102–103, ISBN 0-7603-1190-0
  4. 1 2 3 4 5 6 Salvadori, Clement; Guggenheim Museum Staff (2001) [1998], Krens, Thomas; Drutt, Matthew, eds., The Art of the Motorcycle, Harry N. Abrams, p. 306, ISBN 0-89207-207-5
  5. 1 2 3 4 5 Corbetta, Luigi (2010), Legendary Motorcycles, Agostini, Giacomo, White Star, pp. 168–171, ISBN 8854404489
  6. 1 2 3 4 5 6 7 8 de Cet, Mirco (2001), The Complete Encyclopedia of Classic Motorcycles: informative text with over 750 color photographs (3rd ed.), Rebo, pp. 140–141, ISBN 90-366-1497-X
  7. 1 2 3 4 5 6 7 8 9 10 Brown, Roland (2004), History of the Motorcycle: From the First Motorized Bicycles to the Powerful and Sophisticated Superbikes of Today, Parragon, p. 86, ISBN 1405439521
  8. ↑ "April Fools Dept: The Ten Worst Motorcycles", Cycle World, pp. 89–91, 102–103, April 1985
  9. ↑ Vaughan, Mike (November 2008), "The new faces of vintage: higher-end collectibles are gaining popularity among a new crowd of consumers", Dealernews  – via General OneFile (subscription required) , pp. 72+
  10. 1 2 3 4 5 6 7 Brown, Roland (2006), The Ultimate History of Fast Bikes, Bath, UK: Parragon, ISBN 1-4054-7303-7
  11. 1 2 3 Hunt, Dan (April 1985), "Preview: Kawasaki 750 Mach IV", Cycle World, CBS Publications  – via Bondi Digital Publishing (subscription required) , pp. 34–35
  12. 1 2 3 Falloon, Ian (November 2011). "Holy smoker". Motorcycle Trader (New Zealand) (211): 58–61.
  13. ↑ "Cycle World Test: Kawasaki Mach IV H2 750; Evil, Wicked, Mean and Nasty", Cycle World, Newport Beach, California: Hachette Filipacchi Media U.S., pp. 44–49, March 1975, ISSN 0011-4286
  14. ↑ Jess Thomas; Dale Boller; Cook Neilson (1973), "Superbikes 1973", Cycle
  15. ↑ Walker, Alastair (2011), The Kawasaki Triples Bible: All Road Models 1968-1980, plus H1R and H2R Racers in Profile, Veloce Publishing, ISBN 9781845840754
  16. ↑ Mark Masker (February 24, 2009), "American Machine Foundry – Journey Into History", Hot Bike

References

Wikimedia Commons has media related to Kawasaki Triple.
This article is issued from Wikipedia - version of the 10/22/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.