Matched precipitation rate

In the irrigation industry, matched precipitation rate (MPR) is a term that is used to calculate the amount of precipitation in a given area is uniform. In order to be "matched" all sprinkler heads in a given zone must have the same rate of precipitation. Virtually all major sprinkler manufactures offer some type of MPR nozzle or sprinkler. The primary benefit and main goal of MPR sprinklers is to prevent water waste from run-off while still ensuring that the area receives adequate moisture.[1][2][3]

Formula

The mathematical formula for determining precipitation rate is (GPM x 96.3 ÷ area) = PR

History

The first MPR nozzles, the MP Rotator, were produced by Nelson Irrigation in 2003, and acquired by Hunter Industries in 2007.[4][5][6] Since then the popularity of these highly uniform yet low application sprinklers has caused every major sprinkler manufacturer to produce their own version of an MPR sprinkler, including Rain Bird[7] and Toro.[8]

References

  1. ↑ "The Basics of Matched Precipitation" (PDF). Hunter Industries. Retrieved 21 February 2015.
  2. ↑ "Advantages of Matching Precipitation Rates" (PDF). RainBird. Retrieved 21 February 2015.
  3. ↑ "Matching Precipitation Rates". KSU Turf. Retrieved 21 February 2015.
  4. ↑ "A WATER-SAVING SPRINKLER NOZZLE". Ewing Irrigation. Retrieved 21 February 2015.
  5. ↑ "Hunter Industries Acquires MP Rotator Turf Sprinkle Business from Nelson Irrigation Corp". EBSCOHost. Retrieved 21 February 2015.
  6. ↑ "Sprinklers: Clearing the Mist". IGIN. Retrieved 21 February 2015.
  7. ↑ "MPR Series". RainBird. Retrieved 21 February 2015.
  8. ↑ "MPR Plus Nozzles". Toro. Retrieved 21 February 2015.


This article is issued from Wikipedia - version of the 5/19/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.