Micro drive

This piece is about the bicycle drive train. For other uses see Microdrive (disambiguation)

Micro drive is a type of drivetrain, mostly BMX and MTB, that uses smaller than standard sized cogs.[1] The smallest rear sprocket that fits on a freehub body is an 11-tooth, but with the use of a cassette hub, sometimes called a micro drive rear hub, sprockets as small as 8 teeth may be used.[2]

The advantage of micro drive is that it means a smaller front sprocket, or chainring, can be used without affecting the gear ratio, providing better ground clearance.[1] For example, a bike using a 32t chainring with a 16t rear sprocket can change to a 18t chainring and a 9t sprocket, keeping the 2:1 ratio. Another advantage is the reduction in weight with the reduction in size of all the parts.[1]

The disadvantage is increased stresses on the drive train, leading to increased wear and even premature failure. Chain stretching and breaking can occur more easily. As the front and rear sprockets become smaller, the drive tension in the chain increases. Designers can overcome these issues by choosing materials with higher yield strengths, however usually at higher costs.

References

  1. 1 2 3 "Suntour Components Catalog 1992: MD (Micro Drive Design)" (PDF). The Bicycle Info Project. Retrieved 2011-08-18. Smallest rings and gears: by reducing the diameter of the chainring bolt circle diameter on the crank arm, SUNTOUR is able to replace the standard 46/ 36/24 (or 48/28/28) with a compact 42/32/20 on the front chainrings.
  2. ↑ "Wheels / Hub Tech Help". Dan's Competition. Retrieved 2011-08-18. Currently with a cassette hub you can run as small as an 8t cog.
This article is issued from Wikipedia - version of the 1/12/2014. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.