Normal moveout

Seismic data is sorted by common midpoint and then corrected for normal moveout

In reflection seismology, normal moveout (NMO) describes the effect that the distance between a seismic source and a receiver (the offset) has on the arrival time of a reflection in the form of an increase of time with offset.^[1] The relationship between arrival time and offset is hyperbolic and it is the principal criterion that a geophysicist uses to decide whether an event is a reflection or not.^[2] It is distinguished from dip moveout (DMO), the systematic change in arrival time due to a dipping layer.

The normal moveout depends on complex combination of factors including the velocity above the reflector, offset, dip of the reflector and the source receiver azimuth in relation to the dip of the reflector.^[3] For a flat, horizontal reflector, the traveltime equation is:

$t^{2}=t_{0}^{2}+{\frac {x^{2}}{v^{2}}}$

where x = offset; v = velocity of the medium above the reflecting interface; $t_{0}$ = travel time at zero offset, when the source and receiver are in the same place.

References

↑ Schlumberger Oilfield Glossary. NMO.
↑ Sheriff, R. E., Geldart, L. P. (1995). Exploration Seismology (2nd ed.). Cambridge University Press. p. 86. ISBN 0-521-46826-4.
↑ Yilmaz, Öz (2001). Seismic data analysis. Society of Exploration Geophysicists. p. 274. ISBN 1-56080-094-1.

This article is issued from Wikipedia - version of the 6/29/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.