Pneumatic trail

Bike tire contact patch during a right-hand turn.

Pneumatic trail or trail of the tire is a trail-like effect generated by compliant tires rolling on a hard surface and subject to side loads, as in a turn. More technically, it is the distance that the resultant force of side-slip occurs behind the geometric center of the contact patch.

Causes

Pneumatic trail is caused by the progressive build-up of lateral force along the length of the contact patch, such that lateral forces are greater towards the rear of the contact patch (though less so when the rear of the contact patch begins sliding) and this creates a torque on the tire called the self aligning torque. Because the direction of the side-slip is towards the outside of a turn, the force on the tire is towards the center of the turn. Therefore, this torque tends to turn the front wheel in the direction of the side-slip, away from the direction of the turn.[1][2][3]

Variation

Pneumatic trail is at its maximum when the slip angle is zero and decreases as slip angle increases. Pneumatic trail increases with vertical load.

See also

References

  1. ↑ Cossalter, Vittore (2006). Motorcycle Dynamics (Second ed.). Lulu.com. pp. 59–60. ISBN 978-1-4303-0861-4.
  2. ↑ Smith, Nicholas D. (2004). "Understanding Parameters Influencing Tire Modeling" (PDF). Formula SAE Platform. Retrieved 2008-11-21.
  3. ↑ Clark, Samuel Kelly (1981). Mechanics of pneumatic tires (PDF). U.S. Dept. of Transportation, National Highway Traffic Safety Administration, Washington, D.C.
This article is issued from Wikipedia - version of the 4/24/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.