Rolls-Royce V8 engine

In the history of Rolls-Royce automobiles, only two distinct series of V8 engines have been produced. The first powered the 1905 "V-8" model and was made in very small numbers. The second was developed in the 1950s and was known internally as the "L Series" of engines. The L Series V8, in highly developed form, continues to power Bentley automobiles into the 21st century.

1905 V-8

Three 1905 Rolls-Royce V-8 automobiles were manufactured using the company’s first V-8 engine design but only one example was sold, a car using the two seat “Legalimit” body. This proved unreliable and was later taken back by the factory and scrapped.^[1] The other two were used for factory transport or display purposes. Rolls ordered three more chassis for delivery in 1906 but there is no evidence these were ever made. No example of a 1905 V-8 car or engine is known to survive.

Although the 1905 V-8 cannot be judged a success, lessons learned from the engine were used in subsequent Rolls-Royce engine designs.^[2]

L Series V8

Having used straight six, straight eight and V-12 engines in the interim period, the need for another new engine was recognised in the early 1950s. Development of a totally new V8 engine began in 1952, bearing no relation to the 1905 version apart from its V8 configuration. Rolls-Royce purchased Bentley in 1931 and the new engine was intended for use in both Rolls-Royce and Bentley automobiles. The result was a series of V8 engines known internally as the "L410", the name relating to its bore size of 4.10 inches, in accordance with the company practice.

Despite some attempts at changing the naming convention, the engine has kept both the 4.10 inch bore and the name L410 throughout its life, with the exception of the odd prototype. Developments of the L410 continued in production to power Rolls-Royces and Bentleys until the adoption of BMW V12 power by Rolls-Royce after the BMW purchase of the rights to use the Rolls-Royce brand (for automobiles) in 1998.

The L410 engine is still use by Bentley well into the 21st century, where it remains under continuous development. The Bentley brand and all former Rolls Royce and Bentley automotive manufacturing assets have been owned by Volkswagen AG since 1998.

For further detail of the L Series V8 engines developed since the 1950s for use in Rolls-Royce (to 1998) and Bentley (ongoing) automobiles, see Rolls-Royce - Bentley L Series V8 engine

N Series V8

Around 1987, the requirement for a more modern, downsized V8 engine was identified. Engine designers Derek Jackson and Geoff Attwood performed the majority of work under Les Maddock and Colin Weston, the first result of which was the N80, a 4-valve, double overhead camshaft, 5.0 litre V8. This successfully ran first stage 1000 hours testing straight off the drawing board without incident. Subsequently, the marketing brief foresaw the requirement for a higher capacity version and the N81, 6.0 litre version, was designed. The project was stopped around 1991 with further development of the L410 engine that enabled emissions requirements to be met using a pre-catalyst assembly at substantially lower investment.

References