Altix

Altix was a line of server computers and supercomputers produced by Silicon Graphics (and successor company Silicon Graphics International), based on Intel processors. It succeeded the MIPS/IRIX-based Origin 3000 servers.

The Columbia supercomputer was based on Altix products

History

The line was first announced on January 7, 2003, with the Altix 3000 series, based on Intel Itanium 2 processors and SGI's NUMAlink processor interconnect. ^[1] At product introduction, the system supported up to 64 processors running Linux as a single system image and shipped with a Linux distribution called SGI Advanced Linux Environment, which was compatible with Red Hat Advanced Server.

By August 2003, many SGI Altix customers were running Linux on 128- and even 256-processor SGI Altix systems.^[2] SGI officially announced 256-processor support within a single system image of Linux on March 10, 2004 using a 2.4-based Linux kernel.^[3] The SGI Advanced Linux Environment was eventually dropped after support using a standard, unmodified SUSE Linux Enterprise Server (SLES) distribution for SGI Altix was provided with SLES 8^[4] and SLES 9.^[4]

Later, SGI Altix 512-processor systems were officially supported^[5] using an unmodified, standard Linux distribution with the launch of SLES 9 SP1. Besides full support of SGI Altix on SUSE Linux Enterprise Server, a standard and unmodified Red Hat Enterprise Linux was also fully supported starting with SGI Altix 3700 Bx2 with RHEL 4^[6] and RHEL 5^[7] with system processor limits defined by Red Hat for those releases.

On November 14, 2005, SGI introduced the Altix 4000 series based on the Itanium 2.^[8] The Altix 3000 and 4000 are distributed shared memory multiprocessors. SGI later officially supported 1024-processor systems on an unmodified, standard Linux distribution with the launch of SLES 10^[9] in July 2006. SGI Altix 4700 was also officially supported by Red Hat with RHEL 4^[10] and RHEL 5^[11] — maximum processor limits were as defined by Red Hat for its RHEL releases.

The Altix brand was used for systems based on multi-core Intel Xeon processors. These include the Altix XE rackmount servers, Altix ICE blade servers and Altix UV supercomputers.

NASA's Columbia supercomputer, installed in 2004 and decommissioned in 2013, was a 10240-microprocessor cluster of twenty Altix 3000 systems, each with 512 microprocessors, interconnected with InfiniBand.

Altix 3000

The Altix 3000 was the first generation of Altix systems. It was succeeded by the Altix 4000 in 2004, and the last model was discontinued on December 31, 2006.

Altix 330

The Altix 330 is an entry-level server. Unlike the high-end models, the Altix 330 is not "brick" based, but is instead based on 1U-high compute modules mounted in a rack and connected with NUMAlink. A single system may contain 1 to 16 Itanium 2 processors and 2 to 128 GB of memory. The Altix 1330 was a cluster of Altix 330 systems. The systems were networked with Gigabit Ethernet or 4X InfiniBand.

Altix 350

The Altix 350 was a mid-range model that supported up to 32 Itanium 2 processors. Introduced in 2005, it ran Linux, rather than SGI's own Unix variant, IRIX. The Altix 350 was scalable from one to thirty-two 64-bit Intel Itanium processors. It featured DDR SDRAM and PCI-X expansion ports, and could support SCSI or SATA internal hard drives. Designed as a rack-mount server, the Altix 350 was 2U, meaning it occupied two slots vertically in a standard server rack. The Altix 1350 was a cluster of Altix 350 systems.

As of December 2006, the Altix 350 was superseded by the Altix 450 (based on the Itanium 2) and the Altix XE (based on the Xeon).

SGI timeline

Altix 3300

The Altix 3300 was a mid-range model supporting 4 to 12 processors and 2 to 48 GB of memory. It was packaged in a short (17U) rack.

Altix 3700

The Altix 3700 was a high-end model supporting 16 to 512 processors and 8 GB to 2 TB of memory. It required one or multiple tall (39U) rack(s). A variant of the Altix 3000 with graphics capability is known as the Prism.

It was based on the third generation NUMAflex distributed shared memory architecture and it uses the NUMAlink 4 interconnection fabric. The Altix 3000 supports a single system image of 64 processors. If there are more than 64 processors in a system, then the system must be partitioned.

The basic building block was called a C-brick, which contained two nodes in a 4U high rackmount unit. Each node contains two Intel Itanium 2 processors that connect to the Super-Bedrock application specific integrated circuit through a single front side bus. The Super-Bedrock was a crossbar switch for the processors, the local RAM, the network interface and the I/O interface. The two Super-Bedrock ASICs in each brick are connected internally by a single 6.4 GB/s NUMAlink 4 channel. A processor node also contains 16 DIMM slots that accept standard DDR DIMMs with capacities of 4 to 16 GB.

Altix 3700 Bx2

The Altix 3700 Bx2 was a high-end model supporting 16 to 2,048 Itanium 2 processors and 12 GB to 24 TB of memory. It requires one or multiple tall (40U) rack(s).

Altix 4000

SGI Altix 4700 machines in the Höchstleistungsrechner Bayern II

The Altix 4000 was Silicon Graphics' next Itanium-based product line. It had two models, the Altix 450, a mid-range server, and the Altix 4700, a high-end server.

An Altix 4700 system contained up to 2048 dual-core Itanium 2 and Itanium ("Montvale" revision) microprocessor sockets, connected by the NUMAlink 4 interconnect in a fat tree network topology.^[12] The microprocessors are accompanied by up to 128 TB of memory (192TB with single microprocessor socket blades and 16GB DIMMs).

Each node was contained within a blade that plugged into an enclosure, the individual rack unit (IRU). The IRU is a 10U enclosure that contains the necessary components to support the blades such as the power supplies, two router boards (one for every five blades) and a L1 controller. Each IRU can support ten single-wide blades or two double-wide blades and eight single-width blades. The IRUs are mounted in 42U-high rack, and each rack supports up to four IRUs.

Two types of node, processor and memory, were contained within a blade. Compute blades contain a processor node and consist of two PAC611 sockets for Itanium 2 and Itanium microprocessors, a Super-Hub (SHub) application-specific integrated circuit (ASIC) (chipset) and eight dual in-line memory module (DIMM) slots for memory. The number of microprocessor sockets in a compute blade is one or two. One-processor socket configurations provide more bandwidth as only one microprocessor socket is using the front side bus and local memory. Two-processor socket configurations do not support hyperthreading. Memory blades are used to expand the amount of memory without increasing the number of processors. They contain a SHub ASIC and 12 DIMM slots. Both compute and memory blades support 1, 2 4, 8, and 16 GB DIMMs. SGI support does not currently support any installations with 16GB DIMMs.

Multiple servers could be combined on the same Numalink fabric up to the theoretical maximum of 8,192 nodes (16,384 OS cpus).

Altix XE

The Altix XE servers used Intel Xeon x86-64-architecture processors. Models included:

• Altix XE210 server supported up to two Dual or Quad-Core Intel Xeon processors, 5100 Series or 5300 series, 32GB DDR2 667 MHz FBDIMM memory, 1 x PCIe x8 (low profile) and 1 x PCI-X 133 MHz (full height) PCI slots, and Three SATA/SAS drive bays.
• Altix XE240 server supported up to two Dual or Quad-Core Intel Xeon processors, 5100 Series or 5300 series, 32GB DDR2 667 MHz FBDIMM memory, two PCI slots configuration options (option 1: 2 x PCIe x4 (low profile), 2 x PCIe x4 (full height), 1 x PCEe x8 (full height); or option 2: 2 x PCIe x4 (low profile), 3 x PCI-X 133 MHz (full height), 1 x PCI-X 133 MHz (full height), and Five SATA/SAS drive bays.
• Altix XE250 server
• Altix XE270 server is a 2U configuration with Intel Xeon processor 5500 series, Choice of up to 18 DDR3 DIMMs (2GB, 4GB, or 8GB DIMMs), 2 x PCIe x8 gen 2 (low profile), 1 x PCIe x4 gen 1 (low profile), 2 x PCI-x 133/100 (low profile) PCI slots, Eight SATA or SAS drive bays with optional hardware RAID (0, 1, 5, 6, 10),
• Altix XE310 server was introduced January 8, 2007 and contained two nodes per XE310, up to four Dual or Quad-Core Intel Xeon processors, 5100 Series or 5300 series (two per node), 64GB DDR2 667 MHz FBDIMM memory (32GB per node), 2 x PCIe x8 (1 per node) PCI slots, and Four SATA/SAS drive bays (two per node).
• Altix XE320 server
• Altix XE340 server contains 2 compute nodes within a 1U configuration, Intel Xeon processor 5500 series, Choice of up to 12 DDR3 DIMMs per node (2GB, 4GB, or 8GB DIMMs), 2 x PCIe x16 (1 per node) - low profile PCI slot, and Four SATA drive bays (2 per node) with optional SAS and hardware RAID 0, 1.
• Altix XE500 server is a 3U configuration with Intel Xeon processor 5500 series, Choice of up to 18 DDR3 DIMMs (2GB, 4GB, or 8GB DIMMs), 2 x PCIe x16 gen2 (full height) and 4 x PCIe x8 gen2 (full height) PCI slots, and Eight SATA or SAS drives with optional hardware RAID (0, 1, 5, 6, 10).
• Altix XE1200 cluster
• Altix XE1300 cluster

All Altix XE systems supported Novell SUSE Linux Enterprise Server, Red Hat Enterprise Linux, and Microsoft Windows. Later, VMware support was added across the Altix XE product line.

Altix ICE

The Altix ICE blade platform is an Intel Xeon-based system featuring diskless compute blades and a Hierarchical Management Framework (HMF) for scalability, performance, and resiliency. While the earlier Itanium-based Altix systems ran a single-system image (SSI) Linux kernel on 1024 processors or more using a standard SuSE Linux Enterprise Server (SLES) distribution, the Altix ICE's clustering capabilities uses standard SLES or Red Hat Enterprise Linux distributions and scales to over 51,200 cores on NASA's Pleiades supercomputer.

The Altix ICE 8200LX blade enclosure featured two 4x DDR IB switch blade and one high performing plane, while the Altix ICE 8200EX featured four 4x DDR IB switch blades, and two high performing planes. Both configurations supported either hypercube or fat tree topology, and 16 compute blades within an IRU.

The IP-83 and IP-85 compute blades supported Intel Xeon 5200 or 5400 Series processors, and the IP-95 compute blade supported Intel Xeon 5500 Series processors.

In November 2011 the ICE 8400 was based on either Intel Xeon 5500 or 5600 processors or the AMD Opteron 6100 series processors.

As of 2013, these used the Xeon Phi coprocessors.^[13]

Altix UV

The Altix UV supercomputer architecture was announced in November 2009. Codenamed Ultraviolet during development, the Altix UV combined a development of the NUMAlink interconnect used in the Altix 4000 (NUMAlink 5) with quad-, six- or eight-core "Nehalem-EX" Intel Xeon 7500 processors. Altix UV systems run either SuSE Linux Enterprise Server or Red Hat Enterprise Linux, and scale from 32 to 2,048 cores with support for up to 16 Terabytes (TB) of shared memory in a single system image.^[14]

In 2010 and 2011, SGI retired the Altix name for new servers produced by the company. Altix UV and Altix ICE have been shortened to "SGI UV" and "SGI ICE," while the Altix XE line is now named "Rackable."

Notes

References

• Silicon Graphics, Inc. (June 12, 2007). Altix 3000 Rackmount Owner's Guide.
• Silicon Graphics, Inc. (June 12, 2007). SGI Altix 1330 Cluster Datasheet.
• Silicon Graphics, Inc. (June 12, 2007). SGI Altix 330 Server Datasheet.
• Silicon Graphics, Inc. (June 12, 2007). SGI Altix 350 Server Datasheet.
• Silicon Graphics, Inc. (June 12, 2007). SGI Altix 3700 Bx2 Servers and Supercomputers Datasheet.

External links

• SGI's webpage for Altix
• Linux Journal article regarding scaling of Linux on Altix
• New Altix Software Allows 256-Processor Linux System
• Linux Magazine about scaling Altix to 512p
• HPCwire interview about scaling Altix to 1024p
• SGI Altix Again Crushes World Record for Memory Bandwidth
• SGI Altix Servers Attain Common Criteria Security Certification
• Article on SGI ProPack, Real-time, and Cluster Support for Altix