Saltation (geology)

For definition, and other use disambiguation, see Saltation (disambiguation)

In geology, saltation (from Latin saltus, "leap") is a specific type of particle transport by fluids such as wind or water. It occurs when loose material is removed from a bed and carried by the fluid, before being transported back to the surface. Examples include pebble transport by rivers, sand drift over desert surfaces, soil blowing over fields, and snow drift over smooth surfaces such as those in the Arctic or Canadian Prairies.

Saltation process

At low fluid velocities, loose material rolls downstream, staying in contact with the surface. This is called creep or reptation. Here the forces exerted by the fluid on the particle are only enough to roll the particle around the point of contact with the surface.

Once the wind speed reaches a certain critical value, termed the impact or fluid threshold,[1] the drag and lift forces exerted by the fluid are sufficient to lift some particles from the surface. These particles are accelerated by the fluid, and pulled downward by gravity, causing them to travel in roughly ballistic trajectories.[2] If a particle has obtained sufficient speed from the acceleration by the fluid, it can eject, or splash, other particles in saltation,[3] which propagates the process.[4] Depending on the surface, the particle could also disintegrate on impact, or eject much finer sediment from the surface. In air, this process of saltation bombardment creates most of the dust in dust storms.[5] In rivers, this process repeats continually, gradually eroding away the river bed, but also transporting-in fresh material from upstream.

Suspension generally affects small particles ('small' means ~70 micrometres or less for particles in air[5]). For these particles, vertical drag forces due to turbulent fluctuations in the fluid are similar in magnitude to the weight of the particle. These smaller particles are carried by the fluid in suspension, and advected downstream. The smaller the particle, the less important the downward pull of gravity, and the longer the particle is likely to stay in suspension.


Saltating dune sand in a wind tunnel. (Photo credit: Wind Erosion Research Unit, USDA-ARS, Manhattan, Kansas)

A recent study finds that saltating sand particles induces a static electric field by friction. Saltating sand acquires a negative charge relative to the ground which in turn loosens more sand particles which then begin saltating. This process has been found to double the number of particles predicted by previous theory.[6] This is significant in meteorology because it is primarily the saltation of sand particles which dislodges smaller dust particles into the atmosphere. Dust particles and other aerosols such as soot affect the amount of sunlight received by the atmosphere and earth, and are nuclei for condensation of the water vapour.

Avalanches

Saltation layers can also form in avalanches.

See also

External links

References

  1. Bagnold, Ralph (1941). The physics of wind-blown sand and desert dunes. New York: Methuen. ISBN 0486439313.
  2. Kok, Jasper; Parteli, Eric; Michaels, Timothy I; Karam, Diana Bou (2012). "The physics of wind-blown sand and dust". Reports on Progress in Physics. 75 (10): 106901. Bibcode:2012RPPh...75j6901K. doi:10.1088/0034-4885/75/10/106901. PMID 22982806.
  3. Rice, M. A.; Willetts, B. B.; McEwan, I. K. (1995). "An experimental study of multiple grain-size ejecta produced by collisions of saltating grains with a flat bed". Sedimentology. 42 (4): 695–706. Bibcode:1995Sedim..42..695R. doi:10.1111/j.1365-3091.1995.tb00401.x.
  4. Bagnold, Ralph (1941). The physics of wind-blown sand and desert dunes. New York: Methuen. ISBN 0486439313.
  5. 1 2 Shao, Yaping, ed. (2008). Physics and Modelling of Wind Erosion. Heidelberg: Springer. ISBN 9781402088957.
  6. Electric Sand Findings, University of Michigan Jan. 6, 2008
This article is issued from Wikipedia - version of the 10/29/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.