Schreder HP-19

For the Hewlett-Packard programmable calculator, see HP-19C.
HP-19
Role Glider
National origin United States
Designer Richard Schreder
First flight 1981
Introduction 1981
Number built one


The Schreder HP-19 is an American, high-wing, T-tail, single seat glider designed by Richard Schreder.[1][2]

Design and development

The HP-19 was another Schreder design for the FAI 15 Metre Class. The HP-19 drawings were just complete when the designer lost interest in development and turned his attention to the HP-21 instead. The sole example of the HP-19 was built by Henry Preiss in Schreder's workshop in Bryan, Ohio and first flew in 1981.[1][2][3]

The HP-19 is built from metal and fiberglass and features carbon fiber spar caps, along with foam ribs. The wing is straight, tapered and has winglets, along with the trademark Schreder 90° flaps. The airfoil is a Schreder modification of a Wortmann section. 200 lb (91 kg) of water ballast can be carried. The landing gear is a retractable monowheel.[1][2]

Variants

HP-19C
The sole example of the HP-19 is registered as an HP-19C.[3]

Specifications (HP-19)

Data from Sailplane Directory and Soaring[1][2]

General characteristics

Performance

See also


References

  1. 1 2 3 4 Activate Media (2006). "HP-19 HP Aircraft, LLC". Retrieved 19 April 2011.
  2. 1 2 3 4 Said, Bob: 1983 Sailplane Directory, Soaring Magazine, page 24. Soaring Society of America, November 1983. USPS 499-920
  3. 1 2 Federal Aviation Administration (April 2011). "Make / Model Inquiry Results". Retrieved 19 April 2011.
This article is issued from Wikipedia - version of the 6/23/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.