Sinopia

Sinopia
 
    Color coordinates
Hex triplet #CB410B
sRGBB  (r, g, b) (203, 65, 11)
CMYKH   (c, m, y, k) (0, 68, 95, 20)
HSV       (h, s, v) (17°, 95%, 80%)
Source
B: Normalized to [0–255] (byte)
H: Normalized to [0–100] (hundred)

Sinopia (also known as sinoper, named after the Turkish city Sinop) is a dark reddish-brown natural earth pigment, whose reddish color comes from hematite, a dehydrated form of iron oxide. It was widely used in classical antiquity and the Middle Ages for painting, and during the Renaissance it was often used for the cartoon or preparatory drawing for a fresco. The word came to be used both for the pigment and for the preparatory drawing itself. During the Middle Ages synopia in Latin and Italian came to mean simply a red ochre. It entered the English language as the word sinoper, meaning a red earth color.[1]

Sinopia pigment

From Ancient times through the Renaissance, the pigment was mined in Cappadocia, and exported to Europe through the port of Sinop, a Greek colony on the Black Sea. The pigment was valued for its quality and the genuine product was marked with a seal to show its authenticity.

In the Renaissance "sinopia" or "sinoper" meant any of a range of different shades and hues, and the color had a variety of names; it was sometimes called Venetian red, or Terra di Siena (Sienna earth), or Ocra rosso (red ochre).[2] The color shown in the box above is one more recent commercial variety of the color.

The Italian painter and writer Cennino Cennini (c. 1370- c. 1440) described sinopia in his handbook on painting, "Il libro dell'arte", this way: "A natural pigment called sinoper, cinabrese or porphyry is red. This pigment has a lean and dry character. It responds well to mulling, as the more it is mulled the finer it becomes. It is good for working on panel or on anconas [a type of panel divided into smaller framed compartments], or walls, in fresco and in secco."[3]

Cinabrese and flesh tones

Cennino Cennini described a light red color he called cinabrese, which was apparently a mixture of a light shade of sinopia and lime white; "And I do not know", Cennini wrote, "that they use this pigment outside Florence. And it is absolutely perfect for doing flesh or for making flesh colours for figures on walls. And work in fresco with it. This pigment is made from the loveliest and lightest sinopia that is found and is mixed and mulled with St. John's white, as it is called in Florence; and this white is made from thoroughly white and thoroughly purified lime...this pigment does you great credit if you use it for painting faces, hands and nudes on walls..." [4]

Sinopia as preparatory drawing of frescoes

Sinopia was often used in the Renaissance to make the preparatory drawing for frescoes directly onto the wall, oe on the levelling coat or on the arriccio. These drawings became known simply as sinopie, the plural word in Italian for the pigment.[5] Many of these drawings have been discovered and restored, and are on display in the Museum of Sinopie in Pisa, next to the cathedral, baptistry and the leaning tower.

Cennino Cennini described in detail the process by which a sinopia was made and used. First, the artist covered a wall with a rough layer of lime plaster. When it dried, he made his first sketch in charcoal, blocking in the figures and scenes. Then he brushed off the plaster, and using a small, pointed brush and ochre pigments "as thin as water" and without tempera, he painted in the figures in light shades. Then he used sinopia, also without tempera, to mark out the noses, the eyes, the hair, and the accents and outlines of all the figures in their correct proportions.

When the under drawing was finished, the artist then applied a new thin layer of wet plaster, covering just enough area as he could work in one day. Before the plaster could dry, he filled in the colors into the plaster, following the visible lines of the sinopia.

To make the faces in the final fresco, Cennini recommended that the artist first paint them with an undercoat of brownish green, called a verdaccio. When that was dry, then he painted the flesh tones, made with ochre, lime white and a light red called cinabrese; then he painted the whites of the eyes and white highlights; then used black for the pupils of the eyes, the nostrils, openings in the ears and lines around the eyes, and then used a fine brush and sinopia to paint the lines under the eyes, around the nose, the eyebrows, the mouth and the shading under the upper lip.[6]

See also

Bibliography

References

  1. Daniel V. Thompson, The Materials and Techniques of Medieval Painting, (1956)' Dover Publications, New York, p. 98
  2. Cennino Cennini,The Craftsman's Handbook, note by translator, p xiv.
  3. Lara Broecke, Cennino Cennini, Il libro dell'arte, Archetype 2015, p. 61
  4. Lara Broecke, Cennino Cennini, Il libro dell'arte, Archetype 2015, p. 62
  5. Sinopia. In: Weyer, Angela; Roig Picazo, Pilar; Pop, Daniel; Cassar, JoAnn; Özköse, Aysun; Vallet, Jean-Marc; Srša, Ivan, eds. (2015). EwaGlos. European Illustrated Glossary Of Conservation Terms For Wall Paintings And Architectural Surfaces. English Definitions with translations into Bulgarian, Croatian, French, German, Hungarian, Italian, Polish, Romanian, Spanish and Turkish. Petersberg: Michael Imhof. p. 124. doi:10.5165/hawk-hhg/233.
  6. Lara Broecke, Cennino Cennini, Il libro dell'arte, Archetype 2015, pp. 101-2
This article is issued from Wikipedia - version of the 8/31/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.