Mk 12 Special Purpose Rifle

The United States Navy Mark 12 Mod 0/1 Special Purpose Rifle (SPR) is a rifle in service with United States Special Operations Forces in Operation Enduring Freedom and previously in Operation Iraqi Freedom. SPR initially stood for Special Purpose Receiver, but that nomenclature has been replaced as the weapon became a stand-alone weapons system, and not just an add-on upper receiver assembly (part of the proposed SOPMOD upgrades). The SPR was eventually type classified by the U.S. Navy as the Mk 12. Note that the weapon was developed by a Navy office (Naval Surface Warfare Center Crane Division) for SOCOM units, not for use by units that fall under the conventional US Navy.

Background

The SPR, used by Special Operations Forces of both the U.S. Army and U.S. Navy, is a heavily modified light designated marksman variation of the M16 line of infantry weapons, and is chambered for NATO standard 5.56×45mm ammunition. The SPR concept was originally proposed by Mark Westrom, currently president of ArmaLite, while working at Rock Island Arsenal. The program was an outgrowth of the desire by both US Army and Navy special operations forces for a rifle with greater effective range than an M4 carbine but still shorter in length than a standard issue M16A2/A4. The SPR program appears to have grown out of both the SOPMOD Block II program, and the U.S. Navy SEALs Recon Rifle (a 16" flat-topped M16 carbine). The Naval Surface Warfare Center, Crane Division expanded on the Recon Rifle.^[1]

The exact history of the SPR is unclear, but there appear to be either four or five prime iterations of the rifle, culminating in the most recent Mk 12 Mod 1 version. One progression has four models: SPR Proto 1, SPR Proto 2, Mk 12 Mod 0 and Mk 12 Mod 1. The other progression has five models: SPR, SPR/A, SPR/B, Mk 12 Mod 0, and Mk 12 Mod 1. The specifications in this article follow the second progression.

Different U.S. military service branches appear to typically deploy different iterations of the SPR. Photographs, including both U.S. Department of Defense photographs and privately obtained photographs, consistently show most U.S. Army Special Forces operators using the Mk 12 Mod 0, while NAVSPECWAR operators and U.S. Army Rangers have been identified as using the Mk 12 Mod 1 version.^[2][3] In fact, Marcus Luttrell mentioned the fact that he carried a MK 12 during Operation Red Wings several times in his 2007 book Lone Survivor: The Eyewitness Account of Operation Redwing and the Lost Heroes of SEAL Team 10. Limited use was seen with the USMC.^[4][5]

Beginning in mid-2011, SOCOM began divesting the Mk 12 SPR from their inventory and replacing it with the marksman version of the SCAR Mk 17. The Mk 12 is to be completely replaced by 2017. ^[6]

Specifications

• Upper Receiver: The majority of the SPR upper receivers were initially supplied by Colt, with others being produced by Diemaco (now Colt Canada). Colt had been outsourcing parts of its production to Diemaco for several years, then purchased Diemaco in February 2005. It is unclear whether the upper receivers for the later SPRs came solely from ArmaLite, or were a mix of receivers from ArmaLite and Colt/Diemaco. All of these upper receivers are flat-topped, but have been seen with either the old-style teardrop forward assist or the newer round style.^[1]
• Lower Receiver: When the SPR program was still just an upper receiver assembly (and not a complete rifle), Crane assembled all of its prototypes using either M16A1 or M4A1 lower receivers, because the full auto trigger group in these lower receivers provided a consistent pull while the more common 3-round burst trigger groups didn't. It is unknown whether this pattern continued as the rifle evolved. There is also some issue about whether, when the Navy type-classified the weapon, Precision Reflex Incorporated (PRI) began assembling the rifles themselves. While a number of trigger options were tried in the end, the Knight's Armament Company (KAC) 2-stage trigger was finally decided upon as the standard.^[1]
• Barrel: An 18-inch (457 mm) threaded-muzzle match-grade free floating stainless steel heavy barrel with a 1:7 (178 mm) rifling twist ratio is standard for the SPR.^[5] The barrels are manufactured by Douglas Barrels with a unique contour that reduced weight but maintained rigidity for accuracy. An OPS Inc. muzzle brake and collar (to align the OPS Inc. 12th Model Suppressor) is installed with the barrel. These barrels were designed to take advantage of the new Mk 262 cartridge, which uses a 77-grain (5 g) bullet.
• Buttstock: SPRs have been seen with M16A1 or M16A2 fixed buttstocks, telescoping M4 buttstocks, and the Crane Enhanced telescoping buttstock. The rifles are compatible with any type of stock system developed for the M16.^[1]
• Handguards: In all cases a free-floating forearm is used, which does not touch the barrel directly. This increases the accuracy of the weapon by removing vibration and pressure exerted on the barrel by the rest of the gun. The first SPRs used PRI Gen I or Gen II carbon-fiber free-float tubes. The SPR/A, SPR/B, and Mk 12 Mod 1 all use the Knights Armament Company M4 Match Free-Floating Rail Adapter System, KAC part number 99167. The Mk 12 Mod 0 uses PRI Gen III free-float tubes. The Gen I and Gen II Freefloat Forearms are combined with the Atlantic Research Marketing Systems #38 SPR MOD Sleeve, while the Gen III Freefloat Forearm, due to its it larger barrel nut, only works with the ARMS #38 SPR PEQ-2-3.
• Sights: The original SPR used an early PRI flip-up front sight with an elevation dial, which has since been discontinued. The Mk 12 Mod 0 uses the current PRI flip-up front sight. The SPR/A, SPR/B, and Mk 12 Mod 1 use the KAC rail foreend flip-up front sight, KAC part number 99051. The SPR and Mk 12 Mod 0 use the ARMS #40 flip up rear sight. The rest of the models use the KAC 600 meter flip up rear, KAC part number 98474.
• Optics: Due to the relative modularity of the system, optics (as well as almost everything else) can be mounted according to the operator's wishes. However, SPRs are most often seen with a 3.5–10×40 mm Leupold LR M3 (SPR/A), a 2.5–8×36 mm TS-30 (SPR/B), or a 3–9×36 mm TS-30 A2 (Mk 12 Mod 0/1) Mid Range/Tactical Illuminated Reticle Dayscope. Night vision devices can also be attached. These scopes usually come with flip open dust covers and a honeycomb anti-glare anti-reflection device. Given Nightforce Optics' NAVSPECWAR contract, it is believed that many NAVSPECWAR issued SPRs will use the Nightforce 2.5-10x24 NXS scope.^[7]
• Mounts: A long accessory rail, called a SWAN Sleeve (ARMS SPR MOD or ARMS #38 SPR PEQ-2-3), manufactured by ARMS, is installed, running the length of the rifle. The SPR/A and SPR/B both used the KAC M4 Match FF RAS, KAC part number 99167. Two ARMS #22 Throwlever 30 mm steel rings are used to mount the dayscope. The SPR/A, SPR/B, and Mk 12 Mod 1 use ARMS #22 high rings, while due to the increased height from the SWAN Sleeve, the SPR and Mk 12 Mod 0 use ARMS #22 medium rings. An under-the-handguard ARMS #32 Throwlever mount is used to mount the Harris bipod (the ARMS #42 Throwlever mount is used to mount the Versa-Pod); this features a quick release action.
• Bipod: Originally the relatively expensive Parker-Hale swivel bipods were used, but were taken off the system after the initial SPR. Currently, a Harris swivel model bipod is typically used with the SPR, and is sometimes seen with a KMW Pod-Loc tension adjustment device.^[5] As mentioned above, the bipod is mounted via an ARMS #32 throwlever device attached to the bottom rail of the rifle's forearm. The ARMS mount is used on both the Mod 0 and Mod 1.
• Suppressor: The OPS Inc. 12th Model SPR Muzzle Brake Suppressor threads directly onto the OPS Inc. muzzle brake and uses the collar to stay centered. In 2014, Ops, Inc stopped manufacturing this model of suppressors, and the equivalent product is currently manufactured by Allen Engineering Co. as the AEM5. It is substantially the same suppressor design and actually built by the same individual, Ron Allen, who previously fabricated the 12th model suppressor for Ops, Inc.^[8]
• Ammunition: The SPR is not used to fire standard issue 5.56mm M855A1 or M193 ball or M856 tracer ammunition.^[5] Due to the limits in terminal performance and relatively poor accuracy of the 62-grain (4 g) M855 ball, the Mk 262 Open Tip Match (OTM) round was developed as a more accurate round for the SPR, and manufactured by Black Hills Ammunition. The first production batches were designated Mk 262 Mod 0 and used a Sierra Bullets MatchKing 77-grain (5 g) Hollow Point Boat Tail bullet without a cannelure (crimping groove). Black Hills then approached the Nosler bullet manufacturing company, who made a similar 77 gr (5.0 g) OTM bullet, and Nosler agreed to supply cannelured bullets to Black Hills. The newer load was designated Mk 262 Mod 1. Recently, Sierra added a minimal cannelure to its bullet, and this has since replaced the Nosler bullet in the current versions of Mk 262 Mod 1. In late 2014, Sierra introduced a tipped version of this bullet which adds a polymer tip to improve ballistics. This new bullet was found exclusively in an upgraded version of the Black Hills Ammo MK262 Mod 1 loading, but this bullet has been released by Sierra to reloaders prior to the end of 2014. The Sierra part number for this bullet is 7177.^[9]

Photos

• 
  SPR/A with fixed stock, Harris bipod, and KAC M4 Match FF RAS.
• 
  SPR/B setup similarly to the SPR/A to the left. The SPR/A and SPR/B only differ on the type of scope used.
• 
  US Army SF operator carrying an OD green-painted Mk 12 Mod 0. The front end of the rifle (with suppressor removed) details the OPS Inc. muzzle brake, the Versa-Pod bipod (folded) and Insight Technologies AN/PEQ-2A infrared laser illuminator mounted on the side of the handguards.
• 
  Mk 12 Mod 1 with visible markings
• 
  SPR with a fixed stock and various night vision optics attached.
• 
  US Army SF operator shows his Filipino counterparts an SPR. This one also has a full M16 stock, has the OPS Inc. suppressor attached, and is camouflage painted.
• 
  US Army SF takes aim with his desert camouflage-painted SPR. An Insight Technologies AN/PEQ-2A Target Pointer/Illuminator Aiming Light (TIPAL) is mounted on the right of the rifle's handguards. A standard M4 telescoping stock is mounted.
• 
  An SPR, not a Mk 12 Mod 0. Note the early PRI freefloat tube of constant diameter. This SPR has a Versa-pod bipod and has a fixed stock. The upper receiver has a teardrop-shaped forward assist.
• 
  A U.S sniper looks through the scope of a Mk 12 Mod 1 Special Purpose Rifle.
• 
  Mk 12 Mod 1 rifle in USMC service in Afghanistan, 2010.
• 
  A USMC Mk 12 Mod 1 on a range in Iraq.

See also

• SR-25
• M110 Semi-Automatic Sniper System
• United States Army Squad Designated Marksman Rifle
• U.S. Marine Corps Squad Advanced Marksman Rifle
• U.S. Marine Corps Designated Marksman Rifle
• Marine Scout Sniper Rifle

References

External links

Wikimedia Commons has media related to United States Navy Mark 12 Mod X Special Purpose Rifle.

• Atlantic Research Marketing Systems, Inc.
• Guns & Ammo Article on the Mk12 in combat
• www.mk12.net - Mark 12 Mod X SPR Specifications, information, and pictures

AR-10 derivatives
Battle rifles	AR-10 HK417 MPT-76
Assault rifles	A-556 AR-831 C7/C8 CQ GPC HK416 HK417 LR300 M6 M16 KH-2002 M231 M468 PVAR REC7 SIG516 SOAR SR-47 T-15 T-16 T65 T86 T91
Sniper rifles	M110 MSSR Recon Rifle SAM-R SDM-R SPR SR-25
Semi-automatic rifles	AR-15 AR-platform firearm M&P10 M&P15 M&P15-22 SR-556 XM-15
Carbines	CAR-15 CQBR Daewoo K2 G5 M4 M4A2/A3 OA-93 Tara TM4
Submachine guns	AR-57 Colt 9mm SMG M16K
Machine guns	CAR CMG-1 M27 IAR Shrike
Shotguns	Intrepid RAS-12 T-14
Developments	Colt ACR AAC Honey Badger PDW GA Personal Defense Weapon
Other	CM901 APC