Wolseley 4/44
Wolseley 4/44 | |
---|---|
Overview | |
Manufacturer | BMC |
Production |
1953-1956 29,845[1] |
Designer | Gerald Palmer |
Body and chassis | |
Body style | 4-door saloon |
Powertrain | |
Engine | Morris XPAW 1250 cc in-line 4 |
Dimensions | |
Wheelbase | 102 in (2,600 mm)[2] |
Length | 168 inches (4267 mm)[1] |
Width | 61 in (1,500 mm)[2] |
Chronology | |
Predecessor | Wolseley 4/50 |
Successor | Wolseley 15/50 |
The Wolseley 4/44 is an automobile which was produced by the British Motor Corporation from 1953 to 1956. It was designed under the Nuffield Organisation but by the time it was released in 1953 Wolseley was part of BMC. Much of the design was shared with the MG Magnette ZA which was released later in the same year.
Unlike the MG, the 4/44 used the 1250 cc XPAW engine a version of the XPAG engine previously seen in the later MG T-type series of cars but detuned by only having a single carburettor. The power output was 46 bhp (34 kW) at 4800 rpm.[1] The four speed manual transmission had a column change.
The construction was monocoque with independent suspension at the front by coil springs and a live rear axle.
The car had upmarket trim with wooden dashboard and leather seats and a traditional Wolseley radiator grille with illuminated badge but was expensive at GBP997 on the home market.[1]
An example tested by The Motor magazine had a top speed of 73 mph (117 km/h) and could accelerate from 0-60 mph (97 km/h) in 29.9 seconds. A fuel consumption of 27.6 miles per imperial gallon (10.2 L/100 km; 23.0 mpg-US) was recorded.[2]
The 4/44 was replaced in 1956 by the similar Wolseley 15/50.
References
Wikimedia Commons has media related to Wolseley 4/44. |