Bioadhesive

Bioadhesives are natural polymeric materials that act as adhesives. The term is sometimes used more loosely to describe a glue formed synthetically from biological monomers such as sugars, or to mean a synthetic material designed to adhere to biological tissue.

Bioadhesives may consist of a variety of substances, but proteins and carbohydrates feature prominently. Proteins such as gelatin and carbohydrates such as starch have been used as general-purpose glues by man for many years, but typically their performance shortcomings have seen them replaced by synthetic alternatives. Highly effective adhesives found in the natural world are currently under investigation but not yet in widespread commercial use. For example, bioadhesives secreted by microbes and by marine molluscs and crustaceans are being researched with a view to biomimicry.[1]

Bioadhesives are of commercial interest because they tend to be biocompatible, i.e. useful for biomedical applications involving skin or other body tissue. Some work in wet environments and under water, while others can stick to low surface energy – non-polar surfaces like plastic. In recent years, the synthetic adhesives industry has been impacted by environmental concerns and health and safety issues relating to hazardous ingredients, volatile organic compound emissions, and difficulties in recycling or re mediating adhesives derived from petrochemical feedstocks. Rising oil prices may also stimulate commercial interest in biological alternatives to synthetic adhesives.

Examples of bioadhesives in nature

Organisms may secrete bioadhesives for use in attachment, construction and obstruction, as well as in predation and defense. Examples[2] include their use for

Some bioadhesives are very strong. For example, adult barnacles achieve pull-off forces as high as 2 MPa (2 N/mm2). Silk dope can also be used as a glue by arachnids and insects.

Temporary adhesion

Organisms such as limpets and sea stars use suction and mucus-like slimes to create Stefan Adhesion, which makes pull-off much harder than lateral drag; this allows both attachment and mobility. Spores, embryos and juvenile forms may use temporary adhesives (often glycoproteins) to secure their initial attachment to surfaces favorable for colonization. Tacky and elastic secretions that act as pressure-sensitive adhesives, forming immediate attachments on contact, are preferable in the context of self-defense and predation. Molecular mechanisms include non-covalent interactions and polymer chain entanglement. Many biopolymers - proteins, carbohydrates, glycoproteins, and mucopolysaccharides - may be used to form hydrogels that contribute to temporary adhesion.

Permanent adhesion

Many permanent bioadhesives (e.g., the oothecal foam of the mantis) are generated by a "mix to activate" process that involves hardening via covalent cross-linking. On non-polar surfaces the adhesive mechanisms may include van der Waals forces, whereas on polar surfaces mechanisms such as hydrogen bonding and binding to (or forming bridges via) metal cations may allow higher sticking forces to be achieved.

L-DOPA is a tyrosine residue that bears an additional hydroxyl group. The twin hydroxyl groups in each side-chain compete well with water for binding to surfaces, form polar attachments via hydrogen bonds, and chelate the metals in mineral surfaces. The Fe(L-DOPA3) complex can itself account for much cross-linking and cohesion in mussel plaque,[5] but in addition the iron catalyses oxidation of the L-DOPA[6] to reactive quinone free radicals, which go on to form covalent bonds.[7]

Commercial applications

Shellac is an early example of a bioadhesive put to practical use. Additional examples now exist, with others in development:

Several commercial methods of production are being researched:

Mucoadhesion

A more specific term than bioadhesion is mucoadhesion. Most mucosal surfaces such as in the gut or nose are covered by a layer of mucus. Adhesion of a matter to this layer is hence called mucoadhesion.[13] Mucoadhesive agents are usually polymers containing hydrogen bonding groups that can be used in wet formulations or in dry powders for drug delivery purposes. The mechanisms behind mucoadhesion have not yet been fully elucidated, but a generally accepted theory is that close contact must first be established between the mucoadhesive agent and the mucus, followed by interpenetration of the mucoadhesive polymer and the mucin and finishing with the formation of entanglements and chemical bonds between the macromolecules.[14] In the case of a dry polymer powder, the initial adhesion is most likely achieved by water movement from the mucosa into the formulation, which has also been shown to lead to dehydration and strengthening of the mucus layer. The subsequent formation of van der Waals, hydrogen and, in the case of a positively charged polymer, electrostatic bonds between the mucins and the hydrated polymer promotes prolonged adhesion.[13]

References

  1. ↑ Smith, A.M. & Callow, J.A., eds. (2006) Biological Adhesives. Springer, Berlin. ISBN 978-3-540-31048-8
  2. ↑ Graham, L.D. (2008) Biological adhesives from nature. In: Encyclopedia of Biomaterials and Biomedical Engineering, 2nd ed., Eds. Wnek, G. & Bowlin, G., Informa Healthcare, New York & London, vol. 1, p.236-253. Online abstract
  3. ↑ Li, D., Huson, M.G. & Graham, L.D. (2008) Proteinaceous adhesive secretions from insects, and in particular the egg attachment glue of Opodiphthera sp. moths. Arch. Insect Biochem. Physiol. 69, 85-105. DOI: 10.1002/arch.20267
  4. ↑ Leonard GH, Bertness MD, Yundo PO. Crab predation, waterborne cues, and inducible defenses in the blue mussel, Mytilus edulis. Ecology. 1999;80(1).
  5. ↑ Sever M.J.; Weisser, J.T.; Monahan, J.; Srinivasan, S.; Wilker, J.J. (2004) Metal-mediated cross-linking in the generation of a marine-mussel adhesive. Angew. Chem. Int. Ed. 43 (4), 448-450
  6. ↑ Monahan, J.; Wilker, J.J. (2004) Cross-linking the protein precursor of marine mussel adhesives: bulk measurements and reagents for curing. Langmuir 20 (9), 3724-3729
  7. ↑ Deming, T.J. (1999) Mussel byssus and biomolecular materials. Curr. Opin. Chem. Biol. 3 (1), 100-105
  8. ↑ Combie, J., Steel, A. and Sweitzer, R. (2004) Adhesive designed by nature (and tested at Redstone Arsenal). Clean Technologies and Environmental Policy 5 (4), 258-262. Abstract
  9. ↑ USB flyer
  10. ↑ Graham, L.D.; Glattauer, V.; Huson, M.G.; Maxwell, J.M.; Knott, R.B.; White, J.W.; Vaughan, P.R.; Peng, Y.; Tyler, M.J.; Werkmeister, J.A.; Ramshaw, J.A. (2005) Characterization of a protein-based adhesive elastomer secreted by the Australian frog Notaden bennetti. Biomacromolecules 6, 3300-12. Abstract
  11. ↑ Schnurrer, J.; Lehr, C.M. (1996) Mucoadhesive properties of the mussel adhesive protein. Int. J. Pharmaceutics 141 (1-2), 251-256
  12. ↑ Huang, K.; Lee, B.P.; Ingram, D.R.; Messersmith, P.B. (2002) Synthesis and characterization of self-assembling block copolymers containing bioadhesive end groups. Biomacromolecules 3 (2), 397-406
  13. 1 2 J.D. Smart. The basics and underlying mechanisms of mucoadhesion. Adv Drug Deliv Rev. 57:1556-1568 (2005)
  14. ↑ http://publications.uu.se/theses/abstract.xsql?lang=en&dbid=3538

External links

This article is issued from Wikipedia - version of the 11/13/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.