Comb filter

In signal processing, a comb filter adds a delayed version of a signal to itself, causing constructive and destructive interference. The frequency response of a comb filter consists of a series of regularly spaced notches, giving the appearance of a comb.

Applications

Comb filters are used in a variety of signal processing applications. These include:

Cascaded integrator–comb (CIC) filters, commonly used for anti-aliasing during interpolation and decimation operations that change the sample rate of a discrete-time system.
2D and 3D comb filters implemented in hardware (and occasionally software) for PAL and NTSC television decoders. The filters work to reduce artifacts such as dot crawl.
Audio effects, including echo, flanging, and digital waveguide synthesis. For instance, if the delay is set to a few milliseconds, a comb filter can be used to model the effect of acoustic standing waves in a cylindrical cavity or in a vibrating string.
In astronomy the astro-comb promises to increase the precision of existing spectrographs by nearly a hundredfold.

In acoustics, comb filtering can arise in some unwanted ways. For instance, when two loudspeakers are playing the same signal at different distances from the listener, there is a comb filtering effect on the signal.^[1] In any enclosed space, listeners hear a mixture of direct sound and reflected sound. Because the reflected sound takes a longer path, it constitutes a delayed version of the direct sound and a comb filter is created where the two combine at the listener.^[2]

Technical discussion

Comb filters exist in two different forms, feedforward and feedback; the names refer to the direction in which signals are delayed before they are added to the input.

Comb filters may be implemented in discrete time or continuous time; this article will focus on discrete-time implementations; the properties of the continuous-time comb filter are very similar.

Feedforward form

Feedforward comb filter structure

The general structure of a feedforward comb filter is shown on the right. It may be described by the following difference equation:

\ y[n]=x[n]+\alpha x[n-K]\,

where $K$ is the delay length (measured in samples), and $\alpha$ is a scaling factor applied to the delayed signal. If we take the Z transform of both sides of the equation, we obtain:

\ Y(z)=(1+\alpha z^{-K})X(z)\,

We define the transfer function as:

\ H(z)={\frac {Y(z)}{X(z)}}=1+\alpha z^{-K}={\frac {z^{K}+\alpha }{z^{K}}}\,

Frequency response

Feedforward magnitude response for various positive values of

\alpha

and K=1

Feedforward magnitude response for various negative values of

\alpha

and K=1

To obtain the frequency response of a discrete-time system expressed in the Z domain, we make the substitution $z=e^{j\Omega }$ . Therefore, for our feedforward comb filter, we get:

\ H(e^{j\Omega })=1+\alpha e^{-j\Omega K}\,

Using Euler's formula, we find that the frequency response is also given by

\ H(e^{j\Omega })=\left[1+\alpha \cos(\Omega K)\right]-j\alpha \sin(\Omega K)\,

Often of interest is the magnitude response, which ignores phase. This is defined as:

\ |H(e^{j\Omega })|={\sqrt {\Re \{H(e^{j\Omega })\}^{2}+\Im \{H(e^{j\Omega })\}^{2}}}\,

In the case of the feedforward comb filter, this is:

\ |H(e^{j\Omega })|={\sqrt {(1+\alpha ^{2})+2\alpha \cos(\Omega K)}}\,

Notice that the $(1+\alpha ^{2})$ term is constant, whereas the $2\alpha \cos(\Omega K)$ term varies periodically. Hence the magnitude response of the comb filter is periodic.

The graphs to the right show the magnitude response for various values of $\alpha$ , demonstrating this periodicity. Some important properties:

The response periodically drops to a local minimum (sometimes known as a notch), and periodically rises to a local maximum (sometimes known as a peak).
For positive values of $\alpha$ , the first minimum occurs at half the delay period and repeat at even multiples of the delay frequency thereafter: $f={\frac {1}{2K}},{\frac {3}{2K}},{\frac {5}{2K}}...$ .
The levels of the maxima and minima are always equidistant from 1.
When $\alpha =\pm 1$ , the minima have zero amplitude. In this case, the minima are sometimes known as nulls.
The maxima for positive values of $\alpha$ coincide with the minima for negative values of $\alpha$ , and vice versa.

Impulse response

The feedforward comb filter is one of the simplest finite impulse response filters.^[3] Its response is simply the initial impulse with a second impulse after the delay.

Pole–zero interpretation

Looking again at the Z-domain transfer function of the feedforward comb filter:

\ H(z)={\frac {z^{K}+\alpha }{z^{K}}}\,

we see that the numerator is equal to zero whenever $z^{K}=-\alpha$ . This has $K$ solutions, equally spaced around a circle in the complex plane; these are the zeros of the transfer function. The denominator is zero at $z^{K}=0$ , giving $K$ poles at $z=0$ . This leads to a pole–zero plot like the ones shown below.

Pole–zero plot of feedfoward comb filter with

K=8

and

\alpha =0.5

Pole–zero plot of feedfoward comb filter with

K=8

and

\alpha =-0.5

Feedback form

Feedback comb filter structure

Similarly, the general structure of a feedback comb filter is shown on the right. It may be described by the following difference equation:

\ y[n]=x[n]+\alpha y[n-K]\,

If we rearrange this equation so that all terms in $y$ are on the left-hand side, and then take the Z transform, we obtain:

\ (1-\alpha z^{-K})Y(z)=X(z)\,

The transfer function is therefore:

\ H(z)={\frac {Y(z)}{X(z)}}={\frac {1}{1-\alpha z^{-K}}}={\frac {z^{K}}{z^{K}-\alpha }}\,