FUNcube-1

FUNcube-1 (AO-73)

FUNcube-1 in the cleanroom
Mission type Amateur Radio
Operator AMSAT-UK
COSPAR ID 2013-066AE
SATCAT № 39444
Website funcube.org.uk
Mission duration 3 years, 2 months and 10 days elapsed
Spacecraft properties
Bus 1U CubeSat[1]
Manufacturer ISIS-BV, AMSAT-NL,
AMSAT-UK
Launch mass 0.98 kilograms (2.2 lb)
Power 2.2 watts
Start of mission
Launch date 21 November 2013 (2013-11-21)
Rocket Dnepr
Launch site Yasny Launch Base
Contractor ISL
Orbital parameters
Reference system Geocentric
Regime Low Earth
Perigee 592.6 kilometers (368 Mi)
Apogee 678.6 kilometers (421 Mi)
Inclination 97.7 Degrees
Period 97.3 Minutes

FUNcube-1 is a complete educational single unit CubeSat satellite with the goal of enthusing and educating young people about radio, space, physics and electronics. It is part of a program which aims to launch more of these educational CubeSats.[1] It is the first satellite with outreach as its primary mission.

FUNcube project

Project

The FUNcube project was started in the UK by AMSAT-UK. The satellite has been developed by a team of volunteers from AMSAT-UK and AMSAT-NL, and was assembled at ISIS in Delft. It has been designated with OSCAR number 73 by AMSAT and is now also known as AO-73.

Mission

As part of its mission, FUNcube-1 carries a materials science experiment, from which the school students can receive telemetry data and which they can compare to the results they obtained from similar reference experiments in the classroom. This experiment resembles the Leslie's Cube experiment. One of the first schools to use FUNcube-1 in the classroom was Abbeys Primary School in Bletchley which also featured in the BBC breakfast news two days after launch.[2]

Satellite

Instruments

FUNcube-1 is equipped with a UHF to VHF linear transponder with approx 300 mW PEP output and which can be used by Radio Amateurs worldwide for SSB and CW communications during the weekends.

Specifications

Frequencies:

Maximum uplink power of 5 watts to a 7 dBi gain antenna, more power is not needed to use the transponder. Transponder is SSB/CW Inverting.

Launch

FUNcube-1 was launched at 07:10:11 UTC on 21 November 2013,[3][4][5] as part of the ISILaunch03 campaign,[6] aboard a Dnepr rocket, from Yasny Launch Base, Russia. The launch was contracted by ISL, and operated by ISC Kosmotras.

Distribution

The FUNcube distributed ground station network (DGSN) is used in which radio amateurs receive packets and send these via the internet to the central data collection server, called the data warehouse Data decoding is possible with the free dashboard software provided by the FUNcube team.

To enable easy reception, one of the FUNcube team members, Howard Long G6LVB, has created a USB connected receiver called the FUNcube Dongle.

See also

References

External links

This article is issued from Wikipedia - version of the 9/2/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.