Junkers Profly Ultima

Ultima
Role Homebuilt aircraft
National origin Germany
Manufacturer Junkers Profly
Designer Andre Konig
Introduction 1993
Status Production completed



The Junkers Profly Ultima is a German aerobatic homebuilt aircraft that was designed by Andre Konig and produced by Junkers Profly of Kodnitz, introduced in 1993. When it was available the aircraft was supplied as a kit for amateur construction.[1]

By January 2014 the aircraft was no longer offered by the company.[2]

Design and development

The Ultima features a cantilever low-wing, a two-seats-in-side-by-side configuration enclosed cockpit under a bubble canopy, fixed tricycle landing gear with wheel pants and a single engine in tractor configuration.[1]

The aircraft's 8.2 m (26.9 ft) span wing mounts flaps and has a wing area of 10.5 m2 (113 sq ft). The cabin width is 101 cm (40 in). The acceptable power range is 50 to 80 hp (37 to 60 kW) and the standard engine used is the 80 hp (60 kW) Rotax 912UL four stroke powerplant. For its aerobatic role the Ultima is stressed to +6 and -4 g.[1]

The Ultima has a typical empty weight of 260 kg (570 lb) and a gross weight of 450 kg (990 lb), giving a useful load of 190 lb (86 kg). With full fuel of 120 litres (26 imp gal; 32 US gal) the payload for pilot, passenger and baggage is just 103 kg (227 lb).[1]

The manufacturer estimated the construction time from the supplied kit as 400 hours.[1]

Specifications (Ultima)

Data from AeroCrafter[1]

General characteristics

Performance

See also

References

  1. 1 2 3 4 5 6 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition, page 182. BAI Communications, 15 July 1998. ISBN 0-9636409-4-1
  2. Junkers Profly (2014). "Flugzeuge". Retrieved 6 January 2014.
This article is issued from Wikipedia - version of the 6/24/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.