Maxwell–Stefan diffusion

The Maxwell–Stefan diffusion (or Stefan–Maxwell diffusion) is a model for describing diffusion in multicomponent systems. The equations that describe these transport processes have been developed independently and in parallel by James Clerk Maxwell^[1] for dilute gases and Josef Stefan^[2] for fluids. The Maxwell–Stefan equation is ^[3]

^[4]^[5]

{\frac {\nabla \mu _{i}}{R\,T}}=\nabla \ln a_{i}==\sum _{{j==1 \atop j\neq i}}^{{n}}{{\frac {\chi _{i}\chi _{j}}{{\mathfrak {D}}_{{ij}}}}({\vec v}_{j}-{\vec v}_{i})}==\sum _{{j==1 \atop j\neq i}}^{{n}}{{\frac {c_{i}c_{j}}{c^{2}{\mathfrak {D}}_{{ij}}}}\left({\frac {{\vec J}_{j}}{c_{j}}}-{\frac {{\vec J}_{i}}{c_{i}}}\right)}

∇: vector differential operator
χ: Mole fraction
μ: Chemical potential
a: Activity
i, j: Indexes for component i and j
n: Number of components
${\mathfrak {D}}_{{ij}}$ : Maxwell–Stefan-diffusion coefficient
${\vec {v}}_{i}$ : Diffusion velocity of component i
$c_{i}$ : Molar concentration of component i
c: Total molar concentration
${\vec J}_{i}$ : Flux of component i

The equation assumes steady state, that is the absence of velocity gradients.

The basic assumption of the theory is that a deviation from equilibrium between the molecular friction and thermodynamic interactions leads to the diffusion flux.^[6] The molecular friction between two components is proportional to their difference in speed and their mole fractions. In the simplest case, the gradient of chemical potential is the driving force of diffusion. For complex systems, such as electrolytic solutions, and other drivers, such as a pressure gradient, the equation must be expanded to include additional terms for interactions.

A major disadvantage of the Maxwell–Stefan theory is that the diffusion coefficients, with the exception of the diffusion of dilute gases, do not correspond to the Fick's diffusion coefficients and are therefore not tabulated. Only the diffusion coefficients for the binary and ternary case can be determined with reasonable effort. In a multicomponent system, a set of approximate formulas exist to predict the Maxwell–Stefan-diffusion coefficient.^[6]

The Maxwell–Stefan theory is more comprehensive than the "classical" Fick's diffusion theory, as the former does not exclude the possibility of negative diffusion coefficients. It is possible to derive Fick's theory from the Maxwell–Stefan theory.^[4]

References

↑ J. C. Maxwell: On the dynamical theory of gases, The Scientific Papers of J. C. Maxwell, 1965, 2, 26–78.
↑ J. Stefan: Über das Gleichgewicht und Bewegung, insbesondere die Diffusion von Gemischen, Sitzungsberichte der Kaiserlichen Akademie der Wissenschaften Wien, 2te Abteilung a, 1871, 63, 63-124.
↑ Bird, R.B.; Stewart, W.E.; Lightfoot, E.N. (2007). Transport Phenomena (2 ed.). Wiley.
1 2 Taylor, R.; Krishna, R. (1993). Multicomponent Mass Transfer. Wiley.
↑ Cussler, E.L. (1997). Diffusion - Mass Transfer in Fluid Systems (2 ed.). Cambridge University Press.
1 2 S. Rehfeldt, J. Stichlmair: Measurement and calculation of multicomponent diffusion coefficients in liquids, Fluid Phase Equilibria, 2007, 256, 99–104

This article is issued from Wikipedia - version of the 11/30/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.

Maxwell–Stefan diffusion

See also

References