Switching time

For a frequency synthesizer, the switching time or more colloquially the switching speed is the amount of time from when the command for the next frequency is requested until the time that the synthesizer's output becomes usable and meets the specified requirements. Such requirements will vary depending on the design of the synthesizer. In the 1970s switching speeds ranged from 1 millisecond to 10 microseconds. A more general statement has been given by James A. Crawford: 50 reference cycles as a rule of thumb. By this rule, a reference frequency of 50 kHz has a settling time of 1 millisecond.[1] Two other authors state (Hamid Rategh and Thomas H. Lee) that the switching time (i.e., settling time) is a function of the percentage change in the feedback division ratio.[2] So according to them, the delta N over N itself determines the switching time, where N is the frequency synthesizer's feedback divisor.

References

  1. ↑ Crawford, 1994, p. 303
  2. ↑ Rategh, 2001, p. 25

Further reading


This article is issued from Wikipedia - version of the 5/16/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.