Tangerine Microtan 65

The Microtan 65 in the full System Rack enclosure and with the ASCII keyboard
Manufacturer Tangerine Computer Systems
Type Personal Computer
Release date 1979 (1979)
Introductory price £90.85
£79.35 (in kit form)
CPU 6502 clocked at 0.75MHz
Memory 1KB-48KB RAM, 1KB-14KB ROM
Display Monochrome
Input Keyboard
Successor Oric-1

The Tangerine Microtan 65 (sometimes abbreviated M65) was a 6502 based single board microcomputer, first sold in 1979, which could be expanded into, what was for its day, a comprehensive and powerful system. The design became the basis for what later became the ORIC ATMOS and later computers, which had similar keyboard addressing and tape I/O as in the Microtan 65. The Microtan 65 had a single step function that could be used for debugging at the hardware level. The computer was available as ready-built boards or as kits consisting of board and components requiring soldering together.

The Microtan 65 was intended as a general purpose microcomputer which could be used by laboratories, Original Equipment Manufacturers (OEM)s and the computer enthusiast, and it was designed with expandability in mind. In this way the customer could customise the system, be it as a specialised control system, as a learning tool, or as a general purpose computing device.

Price of the Microtan 65 board in 1981 was £79.35 (inc. VAT) in kit form or £90.85 ready-assembled. The system was not generally available in the shops, one of the few stockists at the time being Henry's Radio of Edgware Road, London.

To accompany the hardware and to offer further support to users, a magazine was created, the Tansoft Gazette (name inspired by the Liverpool Software Gazette). This was edited by Tangerine employee Paul Kaufman who continued as editor when the magazine was renamed Oric Owner. Tansoft also became the name of Tangerine Computer's official software house which supplied a number of software products and book for the Microtan system and subsequently for the Oric range of computers. The Tansoft Gazette was prepared in-house using very basic layout facilities and then printed by local printer, Mid-Anglia Litho. Oric Owner improved on this by using a professional typsetting company.

Main Board

The Microtan 65 Main Board

The Microtan 65 was quite simple by today's standards, with:

Display

The major advance that the Microtan 65 had over a lot of the competition at that time was that the video display was flicker free. At the time a lot of microcomputers would either access the screen memory asynchronously to the video timing (causing flicker and splats on the screen), or would write to the screen memory during a non-display period (which was slow). The Microtan 65 got over this problem by making use of an incidental feature of the 6502. The 6502 (unlike most other CPUs) has a regular period in each instruction cycle when all CPU activity is inside the chip, leaving the external memory available without using complex external arbitration logic. This made video display design simpler and meant that video accesses could be made at maximum speed. This technique is also used on the Oric-1 and Atmos, and in the unrelated Apple II.

The 32×16 characters was the reason that the 6502 was clocked at 750 kHz. To get the circuitry to work at a (nearly) standard video rate meant that the pixel clock had to be 6 MHz. When the Microtan 65 was designed only a 1 MHz 6502 was available, and so 750 kHz was used (6 MHz divided by 8).

The Microtan 65 Hex Keypad

Software

The 1K byte monitor program (later increased to a 2K) was called TANBUG. The software facilities were rudimentary:

Memory Map

The Microtan 65 memory map is shown below ($ representing a hexadecimal memory address):

The screen memory occupies the space between $200 and $3FF. In addition to the standard 8 bits of screen RAM, there was an additional single bit RAM shadowing the $200 to $300 space. This was configured as a 9th bit write-only plane, and was used by the Microtan 65 for rudimentary, or "chunky", graphics. Setting the 9th bit displayed a Minitel type block graphic.

The display is 32 characters across by 16 lines down, with memory address $200 representing the top left hand displayed character, $220 the second row, etc. The character representation is standard ASCII. Several pieces of Microtan 65 software write to the bottom line by writing to memory starting at $3E0 - the leftmost character on the bottom line, rather than vectoring through TANBUG.

Input/output

I/O in the Microtan 65 is decoded into a 16 KB space to simplify the hardware. In fact the 1 KB of RAM is mirrored through the bottom 32 KB, the I/O through the next 16 KB, and the EPROM through the top 16 KB. If you added an expansion board (see TANEX below) the decoding was modified and the wasted space reclaimed.

In common with other 6502 designs, I/O is mapped into the memory space. There is no dedicated I/O space as on the Z80, 8086 etc. The I/O ports are (when fully decoded):

TANEX expansion board

The Microtan 65 Tanex board. The EPROM chip with the green spot (centre) contains the XBUG monitor extension, the other three EPROMs the Microsoft Extended BASIC. The bottom row of chips are the 7K static RAM - 14 X 2114. The 6522 VIA is at left, with an empty socket for an additional 6522 alongside. The empty green socket at top centre is for the 6551 UART

.

Adding a TANEX board provided a number of features:

Without a TANEX board, and due to deliberately ambiguous address decoding, the address $F7F7 would appear to the 6502 to have the same data as $FFF7. In TANBUG, this is a jump to an internal monitor routine. With TANEX installed, $F7F7 is decoded properly, and that address is an entry point into XBUG. XBUG provided features such as cassette tape loading and saving, a simple assembler / disassembler, hex calculator.

The ROM sockets on TANEX could be used to run a 10K Microsoft Extended BASIC, a two-pass assembler, or even (and more likely given the hardware bias of the Microtan 65) code written for a specific hardware control application.

Price of the TANEX board in 1981 was £49.45 as a "minimum configuration" kit - lacking one of the 6522 VIAs and the 6551 and with 1K of RAM - and £60.95 for a similar board fully assembled. TANEX was also available with the board fully populated with chips (although excluding XBUG, ROMs & BASIC) and in this form the costs were £103.16 for the kit and £114.66 ready assembled.

Further Expansion

The interior of a System Rack Microtan 65 with the front panel removed and the Microtan 65 & Tanex boards at the left

The Microtan 65 was designed as a modular system able to be expanded as required, and for this each board included an 80-pin connector at one end allowing it to be plugged into a backplane-type motherboard. A simple two-socket "Mini Motherboard" connected the Microtan 65 and TANEX boards for minimum expansion and in this form the system was also available ready-built from Tangerine, complete with case and full ASCII keyboard, as the Tangerine Micron, costing £395.00 in 1981. For further expansion the builder could purchase the full "System Motherboard" which featured an additional ten sockets, bringing the total available sockets to twelve. For housing this, a "System Rack", rack-based case was available, in black and silver with a black front panel trimmed in Tangerine's trademark orange.

Additional boards became available with time, including a 40K memory board - TANRAM, made up of 32K of dynamic and 8K of static RAM, bringing the total non-paged memory to 48K, a dedicated parallel I/O board featuring 16 parallel input/output ports; a similar dedicated serial I/O board featuring 8 serial input/output ports, a disk controller board for use with disk drives, a Disk Operating System - TANDOS 65, a high resolution graphics board featuring 8K of static graphics RAM giving a resolution of 256 × 256 pixels, a dedicated 32K ROM board, (aimed mainly at OEM and general purpose applications or for use with AIM KIM and SYM systems), capable of holding either 8 × 2732 or 16 × 2716 EPROMs; and a 32K RAM board featuring two 16K banks of 4116 dynamic RAM, again intended for similar purposes to the 32K ROM board. In addition, several third-party suppliers offered boards designed for use with the Microtan 65 system.

In addition to the BASIC programming language Tangerine also released on disk TANFORTH, an extended version of FIG FORTH featuring a full FORTH assembler and editor.

References

    See also

    This article is issued from Wikipedia - version of the 11/14/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.