Tantalum-tungsten alloys

Tantalum-tungsten alloys are in the refractory metals group, keeping their chemical and physical properties the same at high temperatures. The tantalum-tungsten alloys are characterized by their high melting point and the tension resistance. The properties of the final alloy are a combination of properties from the two elements: tungsten, the element with the highest melting point in the periodic table, and tantalum which has high corrosion resistance.[1]

The Tantalum-Tungsten alloys typically vary in their percentage of Tungsten. Some common variants are:

Mechanical properties

The alloys of tantalum-tungsten have high corrosion resistance, and refractory properties. The crystalline structure of the material is body-centered cubic with a substitutional solid solution with atoms of tungsten. The alloy also has a high melting point and can reach high elastic modulus and high tensile strength.[2]

Alloys Hardness (HV) Density (g/cm3) Melting Point (oc) Tensile Strength (MPa) Yield Strength (MPa) Elastic Modulus (GPa)
Ta - 2.5% W 130 16.7 3005 345 230 195
Ta - 7.5% W 245 16.8 3030 550 460 205
Ta - 10% W 325 - 400 16.8 3025 1035 - 1165 875 - 1005 200

[1]

Phase diagram

The equilibrium phase diagram of the alloy formed between the two components Tantalum and tungsten is a binary diagram, where the two components are totally soluble on each other. In this diagram the melting temperature of the two elements are shown. It can be seen that there are two lines, representing the solidus and liquidus.[2]

Binary Phase Diagram (Ta-W)

References

  1. 1 2 3 4 5 ASM Handbook. Properties and Selection Nonferrous Alloys and Special-Purpose Materials. V.2. USA: ASM International, 1990, p. 1746-1747
  2. 1 2 Handbook. Alloy Phase Diagrams. V.3. USA: ASM International, 1990, p. 1453.
This article is issued from Wikipedia - version of the 9/3/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.