Zero-waste fashion

Zero-waste fashion refers to items of clothing that generate little or no textile waste in their production.[1][2][3][4] It can be considered to be a part of the broader Sustainable fashion movement. It can be divided into two general approaches. Pre-consumer zero-waste fashion eliminates waste during manufacture. Post-consumer zero-waste fashion generates clothing from post-consumer garments such as second-hand clothing, eliminating waste at what would normally be the end of the product use life of a garment. Zero-waste fashion is not a new concept[5] - early examples of zero-waste or near zero-waste garments include Kimono, Sari, Chiton and many other traditional folk costumes.

Pre-consumer zero-waste design

Two general approaches fall under this category, both of which occur during a garment's initial production. In zero-waste fashion design the designer creates a garment through the pattern cutting process, working within the space of the fabric width.[2] This approach directly influences the design of the final garment as the pattern cutting process is a primary design step. It is difficult to design a zero-waste garment solely through sketching, although sketching can be a useful speculative tool. Zero-waste manufacture, of which zero-waste design is a component, is a holistic approach that can eliminate textile waste without modifying the garment patterns.

Zero-waste pattern designers

Designers that have used this approach, or approaches to cutting that have an affinity with zero-waste fashion design, include

Ernesto Thayaht
Shreya Upadhyaya
Bernard Rudofsky
Claire McCardell
Zandra Rhodes
Siddhartha Upadhyaya
Yeohlee Teng
Yingxian Xiao
Julian Roberts
Timo Rissanen
Holly McQuillan
Tara St James
Jennifer Whitty
Samuel Formo
Mark Liu
David Telfer
Julia Lumsden
MaterialByProduct
Katherine Soucie
Dusanka Duric
Daniel Silverstein
Charlene O'Brien
Baiba Ladiga

Zero-waste manufacture

Approaches can include the use of technology such as whole garment knitting and the relatively new DPOL a patent by designer Siddhartha Upadhyaya, but often waste is eliminated by reusing the off-cuts in other products. Designers and companies that have used these approaches include:

Alabama Chanin
August (DPOL) by Siddhartha Upadhyaya
Issey Miyake
Pretcastle by Shreya Upadhyaya & Siddhartha Upadhyaya
Sans Soucie
Worn Again
DaRousso

Tonle

[Charlene O'Brien]

Differences from standard fashion production

A standard garment production process may begin with a drawing of the desired garment, a pattern is then generated to achieve this design, a marker is made to most efficiently use the fabric (without modifying the pattern shapes), the pattern pieces are then cut from the cloth, sewn, packed and distributed to retailers. Standard garment production generates and average of 15% textile waste[6] due to the stratification or hierarchy of the garment production process.

Post-consumer zero-waste

This design approach utilises the remnants of the fashion cycle to produce new garments from second hand or surplus goods. Practitioners include:

Martin Margiela
Goodone
Pretcastle
Nick Cave
Sans Soucie
Worn Again
Rhetorical Factory

Waste elimination hierarchy

The waste hierarchy consists of the three 'R's' - Reduce, Reuse, Recycle, in order of impact. Zero-waste fashion design eliminates pre-consumer textile waste, while not necessarily addressing waste created during the use life and disposal phase of the garment's life cycle.

Notable contributions

Exhibitions

References

  1. "The New York Times". nytimes.com. Retrieved 2014-04-26.
  2. 1 2 Gwilt, Alison, and Timo Rissanen. Shaping Sustainable Fashion: Changing the Way We Make and Use Clothes. Earthscan Publications Ltd., 2011.
  3. Hethorn, Janet, and Connie Ulasewicz. 2008. Sustainable Fashion: Why Now?: A Conversation Exploring Issues, Practices, and Possibilities. 1st ed. Fairchild Publications
  4. "Using design practice to negotiate the awkward space between sustainability and fashion consumption". mro.massey.ac.nz. Retrieved 2014-04-26.
  5. http://www.kridt.dk/conference/Speakers/Timo_Rissanen.pdf
  6. ABERNATHY, F. H., DUNLOP, J. T., HAMMOND, J. H. & WEIL, D. (1999) A stitch in time. Lean retailing and the transformation of manufacturing - Lessons from the apparel and textile industries, New York & Oxford, Oxford University Press.

External links

This article is issued from Wikipedia - version of the 9/13/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.